Brass Nozzle Band Heater For Injection Barrel Heating

The stainless steel braided high-temperature wire, locks, elegant hexagonal bolts, and silver welded copper caps make up the brass band heater used to heat the injection molding machine barrel. It has rational component design, extended service life, quick heat dissipation, and uniform heating. Because it is a completely contained construction and does not leak adhesive, manufacturing efficiency is significantly increased.

Product Advantages: 

1. Stable work, easy to use, fast heating, high thermal efficiency, low power consumption

2. The use time is long, and the production can be made any model and size.

3. Good heat preservation performance, good mechanical performance, corrosion resistance, magnetic field resistance, etc.

Precautions:

The product should be used under the specified voltage. There are voltage changes at night in some region, Jaye recommends to use a voltage stabilizer to avoid affecting the efficiency and life of the product.

If you need to customize, please provide the following information:

1. Diameter (inner diameter MM or outer diameter MM for internal applications)

2. Width (MM)

3. Lead form, length and position

4. The position and size of the thermocouple hole or cutout

5. Voltage and power

6. Single chip or double chip

7. Special gap width

8. If you need to mark on the shell, indicate the content of laser marking

9. Order quantity

10. It is best to provide technical mechanical drawings or sketches when ordering