High Density Swaged Watlow Cartridge Heater

The internal wiring high density swaged watlow cartridge heater is finely made, and it is directly led out from the inside of the heating tube with 450 degree high temperature resistance wire. Compared with the ordinary single head heating pipe, the terminal connection mode is not adopted for the end part of the internal wiring single head heating pipe, which makes it have very high temperature resistance and strong mechanical performance, and is very suitable for the embedded heating of the mold and the occasion with large vibration. At the same time, the surface load of the direct outgoing single head heating pipe is 25W per square centimeter.

Application:

The internal wiring high density swaged watlow cartridge heater is suitable for working in the heating medium that cannot be wired at both ends, such as high and low temperature plug-in heating of various sizes of molds and mechanical equipment, including die and other molds, medical instruments, plastic sealing machines, bottle sealing machines, continuous automatic sealing machines, cigarette makers, etc. The heating tube has the advantages of fast heating, uniform heat and convenient use.

Fetures:

1.High service life, reasonable internal structure design. Imported high-purity magnesium oxide core rod and filling material are used, with high thermal conductivity;

2. The conductor has good performance. The conductor can be used in 350 environment for a long time. The direct outgoing structure is adopted, with good mechanical performance;

3. The coreless grinding equipment is adopted, which has a high degree of standardization of pipe diameter, closely cooperates with the equipment assembly, and has high thermal efficiency and fast heat dissipation;

4. Advanced process products, more stable quality, and improved equipment use safety;

5. All models are manufactured according to CE standards, which can meet the needs of most machines.

Technical indicators:

1. Service conditions: ambient temperature - 20 ℃~+60 ℃, relative temperature<80%;

2. Electrical strength: cold withstand voltage AC working 1500V 50HZ for 1min without breakdown;

3. Thermal insulation performance: AC 1000V 50HZ, lasting for 1 min, without breakdown;

4. Leakage current<0.5ma; insulation="" resistance="">30M Ω;

5. Power deviation+5%, - 10%; Surface load up to 25W per square centimeter;