Incubator Controller Modbus Thermostat Temperature Instruments
Incubator Controller Modbus Thermostat Temperature Instruments
Incubator Controller Modbus Thermostat Temperature Instruments
Incubator Controller Modbus Thermostat Temperature Instruments
Incubator Controller Modbus Thermostat Temperature Instruments
Incubator Controller Modbus Thermostat Temperature Instruments
UATC-20 The UATC-20 HRTC Hot Runner Temperature Controller is an advanced and fully microprocessor based module designed for Hot Runner Mold Temperature Control applications. The unique circuitry of the UATC-20 results in a rugged, dependable and simple to operate unit. The UATC-20’s...
Description
| Model | Power supply | Control output | Sensor | RS485 | Code |
| TH/GTH2-A10 | AC/DC 100 ~ 240V | No | Plastic housing temperature humidity sensor |
No | B0300TH01 |
| TH/GTH2-A18 | Yes | B0400TH01 | |||
| TH/GTH2-R10 | AC/DC 100 ~ 240V | Relay heating/cooling or relay humidifing/dehumidifing | No | B0400TH01 | |
| TH/GTH2-R18 | Yes | B0500TH01 | |||
| TH/GTH2-S10 | AC/DC 100 ~ 240V | SSR heating/cooling or SSR humidifing/dehumidifing | No | B0400TH01 | |
| TH/GTH2-S18 | Yes | B0500TH01 | |||
| TH/GTH2-DR10 | AC/DC 100 ~ 240V | 4~20mA heating or analog/relay cooling | No | B0450TH01 | |
| TH/GTH2-DR18 | or relay humidifing/dehumidifing | Yes | B0550TH01 | ||
| TH/GTH2-A10C | AC/DC 100 ~ 240V | No | Stainless steel housing temperature humidity sensor |
No | B0350TH01 |
| TH/GTH2-A18C | Yes | B0450TH01 | |||
| TH/GTH2-R10C | AC/DC 100 ~ 240V | Relay heating/cooling or relay humidifing/dehumidifing |
No | B0450TH01 | |
| TH/GTH2-R18C | Yes | B0550TH01 | |||
| TH/GTH2-S10C | AC/DC 100 ~ 240V | SSR heating/cooling or SSR humidifing/dehumidifing |
No | B0450TH01 | |
| TH/GTH2-S18C | Yes | B0550TH01 | |||
| TH/GTH2-DR10C | AC/DC 100 ~ 240V | 4~20mA heating or analog/relay cooling or relay humidifing/dehumidifing |
No | B0500TH01 | |
| TH/GTH2-DR18C | Yes | B0600TH01 | |||
| DMSHT3XD0A temperature humidity sensor |
Plastic housing temperature humidity sensor | B0120TH01 | |||
| DMSHT3XD0C temperature humidity sensor |
Stainless steel housing temperature humidity sensor with aviation plugs | B0170TH01 | |||
| Sampling speed | 0.5/1/2/4/10 times per second selected by MPS menu |
| Relay capacity | AC 250V /3A Life of rated load>100000 times |
| Power supply | AC/DC 100 ~ 240V(85-265V) |
| Total consumption | < 6VA |
| Ambient environment | Indoor use, temperature: 0 ~ 50℃, no condensation,humidity:<85%RH, altitude<2000m |
| Storage environment | -10 ~ 60℃, no condensation |
| SSR output | DC 24V impulse level, load<30mA |
| Current output | DC 4 ~ 20mA load<500Ω, temperature drift 250PPM |
| Communication port | RS485 port Modbus-RTU protocol, maximum input:30units |
| Insulation impedance | Input, output, power to housing>20MΩ |
| ESD | IEC/EN61000-4-2 Contact ±4KV /Air ±8KV perf.Criteria B |
| Pulse traip anti-interference | IEC/EN61000-4-4 ±2KV perf.Criteria B |
| Surge immunity | IEC/EN61000-4-5 ±2KV perf.Criteria B |
| Voltage drop & short interruption immunity | IEC/EN61000-4-29 0% ~ 70% perf.Criteria B |
| Dielectric strength | Signal input & output & power 2000VAC 1min,<60V Low voltage circuit between DC500V,1min |
| Weight | About 400g |
| Shell material | PC/ABS (flame class UL94V-0) |
| Panel material | PET(F150/F200) |
| Power-off protection | 10 years,times of writing:1 million times |
| Panel protection class | IP65(IEC60529) |
| Safe standard | IEC61010-1 Overvoltage category Ⅱ, pollution level 2, level Ⅱ(Enhanced insulation) |
Send Inquiry
You Might Also Like
