1200 degrees intelligent digital display high-quality ceramic fiber resistance furnace
Leave a message
1200°C Intelligent Digital Display High-Quality Ceramic Fiber Resistance Furnace. However, the value of the 1200°C Intelligent Digital Display High-Quality Ceramic Fiber Resistance Furnace goes far beyond this. Its intelligent design makes experiments more efficient and convenient. The digital display system monitors temperature changes in real time and automatically adjusts power output using a precise algorithm, ensuring industry-leading temperature stability of ±1°C. This temperature control capability significantly improves the repeatability and reliability of processes such as sintering and heat treatment, making it particularly suitable for rare earth material synthesis and precision ceramic firing, which require stringent temperature control.
Notably, its unique ceramic fiber furnace structure combines lightweight design with ultra-low heat capacity. Compared to traditional refractory brick furnaces, its heating rate is more than three times faster, reaching 1200°C from room temperature in just 15 minutes. Its cooling speed is equally impressive. This rapid response not only shortens experimental cycles but also effectively reduces energy consumption. Actual test data shows that power consumption during eight hours of continuous operation is 22% lower than that of similar products. Large-scale use in university laboratories can save tens of thousands of yuan in electricity bills annually.
The safety protection system demonstrates the designer's forward-thinking approach. A triple power-off mechanism (automatic over-temperature shutoff, leakage protection, and an emergency mechanical switch) and intelligent alarm function form a three-dimensional protective network. If the furnace door is not sealed or the thermocouple is abnormal, the system immediately triggers an audible and visual alarm and stops heating. A test report from a materials laboratory shows that the equipment achieved zero failure rates and a high accuracy rate of the protection system after 300 consecutive high-temperature cycle tests.
The following is a detailed introduction to the 1200°C intelligent digital display high-quality ceramic fiber resistance furnace:
Structural Design
Furnace Chamber Material: Lightweight alumina ceramic fiber, such as polycrystalline alumina fiber and polycrystalline mullite fiber, is typically used. This material offers advantages such as light weight, high-temperature resistance, low thermal conductivity, low specific heat, resistance to mechanical vibration, resistance to rapid cooling and heating, and resistance to cracking, crystallization, and slagging. It effectively reduces heat loss and provides a stable high-temperature environment for samples.
Heating Elements: Generally, imported high-quality nickel-containing HRE alloy heating wire is used. For temperatures below 1200°C, the heating elements are typically semi-recessed, while for temperatures above 1200°C, they are exposed to direct heat. Some heating elements also use silicon carbon rods, which offer rapid heating and oxidation resistance, extending their service life by 3-5 times compared to conventional heating elements and providing more uniform heating.
Furnace Design: Most furnaces feature a fully integrated design, with the shell constructed from high-quality cold-rolled steel, finished with a high-temperature paint finish or a luxurious, aesthetically pleasing two-tone imported epoxy powder electrostatic spraying process. These components are heat-resistant and corrosion-resistant. Furthermore, the double-shell air-insulated structure provides excellent insulation, keeping the furnace surface temperature low. At 1000°C, the surface temperature is typically only around 50°C.
Performance Features
Fast Heating: Compared to traditional muffle furnaces, the heating rate can be approximately doubled, meeting the requirements of rapid heating processes and saving time and costs. For example, some high-quality products can be heated from room temperature to 1200°C in less than 40 minutes.
Energy-saving and High-efficiency: Energy consumption is low, typically about 40% of that of ordinary muffle furnaces. The excellent thermal insulation properties of the ceramic fiber material reduce heat loss, significantly reducing energy consumption.
Precise Temperature Control: Equipped with a microcomputer PID controller and combined with a K-type thermocouple, the temperature control accuracy reaches ±1°C. Features include temperature correction, over-temperature alarm, and timer settings, ensuring stable temperature control and meeting the temperature control requirements of various precision experiments and production processes.
Control System
Intelligent Digital Display: A 4.3-inch three-row digital LCD or large-screen LED display intuitively displays parameters such as set temperature, operating temperature, and hold time, facilitating real-time monitoring and operation.
Microcomputer Control: Utilizing microcomputer artificial intelligence control technology, the system features PID regulation, fully automatic control, self-tuning, multi-segment programming, and the ability to program various heating and hold programs, achieving automated control without the need for human oversight.
Safety Protection: Equipped with independent protection devices for over-temperature, over-pressure, over-current, leakage, and short-circuit, the 1000 series also features an over-voltage alarm, menu lock, door-open power-off, and power-on delay to ensure equipment and personnel safety.
Application Areas
Laboratory Applications: Widely used in materials, metallurgy, and chemistry laboratories in universities and research institutes for dry sample pretreatment, material sintering, dissolution, and analysis, elemental analysis, and precision annealing of crystals.
Industrial Applications: In industrial and mining enterprises, the 1000 series can be used for ceramic sintering, precision annealing and microcrystallization of glass, powder metallurgy, sintering of nanomaterials, quenching, annealing, and tempering of metal parts, as well as related production processes in the chemical and electronics industries.
Specifications
Power Supply Voltage: Commonly available are AC220V or AC380V, 50Hz.
Furnace size: Various options are available, such as 120mm × 200mm × 80mm, 200mm × 300mm × 120mm, and corresponding internal volumes of 2L and 7L, respectively.
Input power: Varies depending on the model, generally ranging from several kilowatts to tens of kilowatts.
With the penetration of artificial intelligence technology, newer models are now equipped with IoT modules. Researchers can remotely modify sintering curves via a mobile app. The system also automatically generates temperature-time curves and seamlessly integrates with MES systems. These innovations make this equipment a core node in the development of smart laboratories, redefining the application boundaries of high-temperature heat treatment equipment.








