16 common troubleshooting methods for induction cookers, detailed analysis of causes and maintenance methods

Common troubleshooting methods for Midea induction cookers:
Common Fault 1: The wire is plugged in properly and the indicator light is also on, but the induction cooker is not heating.
Solution: Lock the wire reel properly; Replace the diode for voltage stabilization; Replace the basic components.
Common Fault 2: During intermediate heating, the electromagnetic furnace suddenly stops working.
resolvent:
1. It is possible that the highest temperature point has been reached, and power will be restored after about 10 seconds.
2. The internal temperature may be too high, and it can be restarted after about 4 minutes.
3. Check if you have pressed the wrong function key.
4. When automatically cooking porridge and soup, the water in the pot is dried.
Of course, there are also external power issues that need to be checked.
Of course, if none of these problems are true, it may be an internal problem with the induction cooker. It is still necessary to refer to the maintenance code or contact maintenance personnel.
Common Fault 3: All function keys and indicator lights are normal, but the sound alarm prompts that there is no pot
Solution: Check the power board. There may be a problem with the resistor and it needs to be replaced.
Common Fault 4: When inserting the plug, no sound of B1 is heard, and the power indicator light does not light up.
resolvent:
1. Check if there are some environmental factors from the surrounding environment, such as plug detachment, open fuse, or automatic switch circuit.
2. Check if the pot is suitable, placed in the appropriate position, and if the diameter is less than 12cm.
3. It may be that the internal parts are faulty, so it is necessary to refer to the repair code or seek professional assistance.
Common Fault 5: Normal heating, but the indicator light does not light up
Solution: Replace the LED diode and replace the LED substrate component.
Common Fault 6: The buzzer does not stop sounding.
Solution: Check if the switch, thermistor, and main control IC are normal; Check if the transformer is functioning properly; Check or replace the substrate components.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!