1600 degrees new material sintering small industrial box muffle furnace
Leave a message
A small industrial box-type muffle furnace capable of sintering new materials at 1600°C. However, sintering at 1600°C is no easy feat, placing stringent demands on the material selection and structural design of the box-type muffle furnace. Traditional refractory materials are prone to softening and deformation at extreme temperatures. To address this, the R&D team innovatively employed a three-layer composite furnace chamber structure: an inner layer of high-purity alumina fiber modules, a middle layer filled with nano-aerogel insulation, and an outer layer reinforced with silicon carbide ceramic. This "sandwich" structure maintains the furnace's lightweight while improving thermal efficiency by over 40% compared to traditional furnaces.
The temperature control system utilizes a multi-stage PID intelligent algorithm, providing real-time temperature feedback via 12 sets of K-type thermocouples distributed throughout the furnace chamber. Upon detecting temperature fluctuations exceeding ±2°C, the system automatically adjusts the power output of the silicon-molybdenum rod heating elements within 0.3 seconds. Notably, the unique gradient cooling program simulates the natural crystallization process of materials, which is crucial for the preparation of high-performance ceramics.
The 1600°C small industrial box-type muffle furnace for sintering new materials is primarily used for high-temperature sintering of new materials and other processes. It features high temperatures and intelligent temperature control. The following is a detailed introduction:
Structural Features:
Furnace Chamber Material: High-performance insulation materials such as alumina polycrystalline fiber are typically used. These materials are lightweight, provide excellent insulation, and are highly resistant to thermal shock. They effectively reduce heat loss and provide a stable high-temperature environment for samples.
Heating Elements: Silicon-molybdenum rods are typically used as heating elements. They are characterized by high temperature resistance, oxidation resistance, high heating efficiency, and long life. They operate stably at temperatures up to 1600°C, ensuring a rapid and uniform temperature rise within the furnace chamber.
Temperature Sensor: S-type thermocouples are commonly used, offering high accuracy and stability. They accurately measure the furnace chamber temperature and provide real-time feedback to the temperature control system, providing data support for temperature control.
Furnace Door Design: The furnace door is typically sealed with ceramic fiber sealing rope or silicone rubber sealing rings to prevent heat loss and air ingress. Some furnace doors are equipped with a safety lock and a power-off function to prevent accidents caused by accidentally opening the door during heating.
Casing Material: Typically made of cold-rolled steel with a high-temperature paint finish, it offers excellent corrosion resistance and aesthetics. The casing features a double-layer structure with an air cooling system or insulation material in the middle, effectively reducing the furnace surface temperature and preventing burns to operators.
Performance Parameters:
Rated Temperature: Maximum temperature reaches 1600°C, with a continuous operating temperature generally limited to 1550°C.
Temperature Control Accuracy: Temperature control accuracy is typically ±1°C.
Heating Rate: The heating rate can reach up to 20°C/min and can be adjusted according to experimental requirements, quickly reaching the set temperature and saving experimental time.
Power and Voltage: Power varies depending on furnace size, such as 4kW. The operating voltage is generally 220V.
Furnace Dimensions: Common small furnace sizes include 150×300×120mm and 200×300×180mm.
Control System: Utilizes artificial intelligence for temperature control, featuring PI regulation, fuzzy control, and auto-tuning functions, allowing for the programming of various temperature ramps. Some muffle furnaces are equipped with a conversion interface for computer connection, enabling remote control, real-time tracking, historical records, and report output.
Applications: Widely used in materials science research, electronics, metallurgy, chemistry, and environmental protection, this furnace can be used for sintering ceramics, heat treating metals, powder metallurgy, and catalyst preparation and research.
In practice, this furnace type has been found to be particularly suitable for small-batch precision sintering of 5-10 cm³. A specialty ceramics company has used it to produce zirconium oxide electrolyte sheets for micro fuel cells, increasing their yield from 78% to 93%. The furnace door features a hydraulically controlled lowering mechanism and a double-layered quartz observation window, ensuring safe operation and facilitating real-time monitoring of sintering conditions. At present, this model has been successfully used in high-end manufacturing fields such as aerospace precision components and medical artificial bone substitute materials, marking an important breakthrough in my country's ultra-high temperature micro-sintering equipment field.








