1600 degrees small temperature controlled industrial box type resistance furnace
Leave a message
The precision control system of this 1600°C small temperature-controlled industrial box-type resistance furnace lies at the heart of modern high-temperature processing. When the furnace temperature exceeds the 1000°C threshold, a platinum-rhodium thermocouple captures every 0.5°C fluctuation in real time, forming a closed-loop control loop with an SSR solid-state relay using a PID intelligent algorithm. This millisecond-level temperature control mechanism ensures a temperature uniformity of ±2°C within the furnace, fully meeting the demanding requirements of processes such as specialty ceramic sintering and precious metal smelting.
In terms of safety, the equipment features a five-layer interlock design: automatic power off upon over-temperature, mechanical door locking, leakage protection module, overcurrent fuse, and an emergency water cooling system. Particularly noteworthy is the double-layer alumina fiber lining structure, whose unique gradient insulation design keeps the outer shell temperature below 60°C. This also increases thermal efficiency to 78%, resulting in over 30% energy savings compared to traditional refractory brick structures.
In practice, engineers can program 30 temperature control curves using the 7-inch touchscreen, supporting ramp temperature increase (adjustable from 0.1°C/min) and stepped hold modes. A quartz observation window on the side of the furnace, combined with an infrared thermal imager, allows for full visual monitoring of the sintering process. Optional vacuum systems (maximum vacuum 5×10-3 Pa) or controlled atmosphere interfaces (nitrogen/argon flow adjustable from 0-10 L/min) are available to meet different process requirements.
The 1600°C small temperature-controlled industrial box-type resistance furnace is a heating device capable of providing a high-temperature environment of 1600°C for industrial production or experimental research. Temperature control is achieved through a precise temperature control system. The following is a brief introduction:
Structural Features:
Furnace Chamber Material: Typically constructed of vacuum-formed, high-purity alumina polycarbonate, it features high operating temperatures, low heat storage, and resistance to rapid heating and cooling. Some resistance furnaces utilize special materials in areas prone to impact during material handling to enhance durability.
Heating Elements: Typically silicon-molybdenum rods, they offer excellent high-temperature heating performance and stability. They can be mounted vertically on either side of the furnace to provide heat.
Furnace Structure: These typically feature a double-layer structure, with insulation materials such as aluminum silicate fiberboard filling the center. Air or water cooling maintains a low furnace surface temperature, minimizing heat loss and ensuring operator safety.
Temperature Control System:
Temperature Control Accuracy: These furnaces typically utilize a high-precision temperature control system using a B-type thermocouple as a temperature sensor, achieving a temperature control accuracy of ±1°C, enabling precise control of the furnace temperature.
Programmable Temperature Control: These furnaces feature programmable temperature control, enabling multi-step temperature ramping, hold, and cooling. Typically, 30 or 50 programmable steps are available, allowing flexible configuration of parameters such as ramp rate and hold time to meet specific process requirements. Control software can also be used to connect to a computer for remote control and historical data viewing.
Safety Features: Equipped with a variety of safety protection devices, including over-temperature, over-pressure, over-current, burnout, power failure, leakage, and short-circuit protection. If the furnace temperature exceeds the set upper limit or a thermocouple malfunctions, the heating power is automatically cut off to prevent equipment damage and safety accidents.
Application Areas: Primarily used in laboratories of industrial and mining enterprises, universities, colleges, and scientific research institutions, it can be used for chemical element analysis and high-temperature heat treatments such as quenching, annealing, and tempering of small steel parts. It can also be used for high-temperature heating applications such as sintering, dissolving, and analyzing metals, stoneware, and ceramics.
With the advancement of intelligent manufacturing, the new generation of models has integrated Industry 4.0 interfaces and supports remote monitoring via the MODBUS-RTU protocol. Users can view 18 operating parameters, including heating power curves and accumulated energy consumption, in real time via a mobile app. If the thermocouple experiences a 0.3% linear deviation, the system automatically triggers a self-calibration process. This intelligent evolution is redefining the application boundaries of small high-temperature equipment.







