Air cooled chiller liquid storage tank

Air cooled chiller liquid storage tank

It is one of the models of chillers, which cools room temperature water to the necessary temperature through the compression working principle of the chiller to enhance the cooling of the mold or machine. It is used as a standalone unit, with a built-in fan installed for heat dissipation. There are mainly three interconnected systems: refrigerant circulation system, water circulation system, and electrical self-control system. Chinese name: air-cooled chiller, foreign name: Aircooledchiller, usage conditions: single machine use, heat dissipation installation, built-in fan, three systems: refrigerant circulation, water circulation, and electrical self-control. Catalogue 1: Introduction 2: Construction 3: Unit features 4: Effects 5: Cleaning 6: Differences 7: Refrigeration principles 8: Application fields 9: Four characteristics. Brief introduction: Refrigeration cycle system: The liquid refrigerant in the evaporator absorbs heat from water and begins to evaporate, A necessary temperature difference is formed between the final refrigerant and water, and the liquid refrigerant also completely evaporates into a gaseous state, which is then sucked in and compressed by the compressor (with pressure and temperature added). The gaseous refrigerant releases heat through the condenser and condenses into a liquid.

Reservoir: The reservoir is assembled after the condenser and is directly connected to the discharge pipe of the condenser. The refrigerant liquid of the condenser should flow smoothly into the storage tank, so as to fully utilize the cooling area of the condenser. On the other hand, when the heat burden of the evaporator changes, the amount of refrigerant liquid required also changes, and at that time, the liquid storage tank plays a role in adjusting and storing the refrigerant. Regarding the operation principle of small-scale cold water, the cold installation system often does not install a liquid storage device, but uses a condenser to adjust and store refrigerant. Drying filter: In the working principle of cold water, it is necessary to prevent moisture and dirt (oil, iron, copper) from entering the cold cycle. The main source of moisture is the trace moisture contained in newly added refrigerants and lubricating oil, or the moisture brought by air entering during maintenance of the system.

Www.superbheater.com