Analysis of alarm and warning during box type electric furnace heating

Take corresponding measures, please follow the following steps. When the set temperature is not reached, the alarm will start. Our engineers will address this issue and I believe we will all find out on our own where the product problem occurred. Some customers have reported that the box type electric furnace is being heated.
Following the above method of inspection, you may discover where the problem lies. If the box furnace still does not solve the problem, please feel free to call us for consultation. We will send engineers to help you solve various problems.
When heating, the alarm data slightly exceeds the temperature we set. Check ALM1, this is the upper limit alarm data, and see what it is. After adding the correct numerical temperature of the box furnace to ALM1, the total temperature of the tube furnace exceeds our set temperature by a little bit, which is the function of ALM1.
We can roughly start from two points, check the probe, which is the thermocouple, and then check whether the temperature controller of the box furnace is working properly.
We should first take a look at the temperature control table. Here, the setting value of the tubular electric furnace must be zero, and only zero is normal.
Take a look at the set value to see if it was accidentally set incorrectly. That is to look at the SV data on the box furnace.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!