Characteristics of high-temperature uniform heating electric heating tubes:

Characteristics of high-temperature uniform heating electric heating tubes:

High temperature uniform heating electric heating tube divides the heater power into three zones based on the shape, size, and heat dissipation of the heated object. Compared with ordinary cylindrical heaters, the temperature distribution of the heated object is more uniform.

The use of ordinary heaters can easily cause problems such as unstable mold temperature, warping of formed products, dimensional deviation, and uneven glossiness. Liquid silicone rubber (LSR), thermosetting resins, and other resin forming require more accurate control of mold temperature distribution. In such cases, uniform heating heaters are suitable.

Divide the heating area into three parts and change the winding method of nickel chromium heat-resistant alloy wire.

Compared with ordinary heaters, the temperature of&2 decreases, resulting in better temperature distribution balance.

Maximum operating temperature: 950 ℃

The maximum operating temperature is the temperature of the armored pipe. Please pay attention to the heat resistance temperature of the wire, and the wire must be led out from the installation hole.

● The product is suitable for: ① overall high-temperature working environment; ② Frequent movement of mold heating; ③ Equipment with high safety requirements; ④ Hot bending machine forming equipment.

Firstly, being too concerned about the price of electric heating tubes and neglecting quality. For example, customers often ask how much the electric heating tube costs as soon as they come up? We can't help but ask a series of questions: what

Is it an electric heating tube? What is the power? What is the voltage? What is the length? What is the diameter of the pipe? What are the requirements for fasteners? What are the wiring requirements? What are the characteristics of your electric heating tube

Is it? If these issues are not clear, we cannot provide a quotation. Then there is the comparison of prices, as if low prices are the only hard truth, but in fact, it is difficult to purchase

To find a suitable electric heating tube, it mainly depends on your actual working conditions and environment. Different quality requirements will naturally result in different prices for electric heating tubes.

Secondly, customers often place too much emphasis on power and materials, neglecting the actual usage environment or requirements of the product. For example, some customers demand excessively high power, exceeding the national standard

The standard at home told him that exceeding the power limit would affect the service life, but he ignored it. One pursued high power, which led to a short service life of the electric heating tube, and the other was the material

The requirement for quality pipe diameter is that some customers insist on using very thick pipes, such as a 12mm diameter for boiling water, and insist on making 20mm pipes, which can actually cause waves

Expenses also increase procurement costs.

Www.superbheater.com