Classification of vacuum forming machine rubber injection machine

Classification of vacuum forming machine rubber injection machine

 

There are many types of injection machines, according to the plasticizing method of rubber, there are plunger type and screw type; according to the type of machine transmission, there are hydraulic type and mechanical type; according to the type of clamping device, there are direct pressure type, hydraulic machinery According to the configuration of machine components, there are horizontal, vertical, angle, multi-mode injection machines and so on.

Features of Vacuum Forming Machine Rubber Injection Molding Machine

 

1. Simplify the process, can achieve high-temperature rapid vulcanization of rubber products, and shorten the production cycle;

 

 

 

2. The size of the product is accurate, the physical and mechanical properties are uniform, and the quality is high, which is especially suitable for the molding and vulcanization of thick-walled products;

 

 

 

3. The operation is simple, the labor intensity is reduced, and the degree of mechanization and automation is high;

 

 

 

4. The mechanism of the injection machine and its mold is relatively complex, the investment is large, and the maintenance level is required to be high, and it is mostly used for the production of large-scale molded products.

Blockage of filter screen of vacuum forming machine and blockage of cooling tower

 

If the temperature of the injection molding machine increases, then there are still many harms to us in this case. For example, it can give the problem of deforming the machine. Because if the thermal expansion coefficient of the hydraulic part is different, its clearance will also change accordingly, so there will be the possibility of system failure, and the accuracy of the hydraulic system's own transmission will naturally also affect the working quality of the machine.

 

 

 

An increase in temperature causes the viscosity of the oil to decrease. If such a situation occurs, it will degrade all system functions of the injection molding machine. Because the viscosity decreases, the wear degree of the parts in the lubricated part will also greatly increase, which will increase the wear problem. Excessive temperature can damage parts of the rubber structure. Because if the temperature is too high, the aging speed of the rubber will be accelerated, so that its sealing performance will be reduced, the service life will also be reduced, and leakage accidents will occur. If the temperature is too high, it may also be caused by the blockage of the pipeline, such as the blockage of the filter screen and the blockage of the cooling tower.

www.superbheater.com