Common faults and solutions of automatic sealing machine

During the use of the sealing machine, the failure shall be solved in time to avoid affecting the production schedule. Common problems and solutions are as follows:
1. Because the vibration is not ideal and the blanking is not compact, it is necessary to increase the vibration frequency or tighten the fixing screws at the vibration part.
2. Regularly add lubricating grease to the sliding plate, pressure rod bearing, eccentric wheel, guide post, guide rail and other transmission parts to maintain the performance of the machine.
3. Regularly clean the surface of the automatic sealing machine, the bottom plate of the lower mold and the sliding plate, groove, upper mold pressing plate and positioning rod. Under normal conditions, the heat seal temperature is not enough. Only when the overall thickness of the bag body increases, the heat sealing temperature will increase accordingly; If the heat sealing speed is too fast, it cannot be sealed. If the speed is too fast, the seal will be transported to the cold pressing place by the traction roller for cooling treatment before heating, which naturally cannot meet the quality requirements of the heat seal. These are the maintenance methods that enterprises cannot solve by themselves.
Hidden danger in the operation of the sealing machine: if two or more people operate at the same time, their attention is not focused, and there is hand slip or accidental failure of the machine, it is easy to cause personal injury. When a person puts the cup in place, he should pay attention and act quickly. Don't look around. If you put the cup wrong, you should release it in time. If you don't release it, it will cause other accidents. When the equipment is running at high speed, this operation is a dangerous operation with multiple accidents. Once the angle is slightly deviated, it will cause accidents, even accidents, so no matter what you do, you should concentrate.