Common quality problems of bottle blowing machine

Explain several common production problems and solutions of bottle blowers:
1、 The bottle sticks to the bottom mold:
a: The time of mold closing operation and bottom mold rising operation do not coincide. It is recommended to check whether the solenoid valve of the bottom mold cylinder works normally.
b: The blowing time is too short. Extend the blowing time.
c: There is no cooling water. Check the cooling water.
Bottle blowing machine
2、 The bottle blowing machine cannot blow bottles:
a: The heating temperature of the preform is too low. Strengthen the heating of the preform.
b: The pressure of blow molding air is too low. Confirm the pressure of blowing air.