Common sense points about cast aluminum electric heaters

Although the cast aluminum electric heaters on the market now have excellent heating effects and are of good quality, if they are not operated in the correct steps and methods, they may lead to reduced thermal efficiency and potential safety hazards. Let's take a brief look at the basic common sense that should be mastered during the use of electric heaters.

Common sense of using cast aluminum electric heaters

First, there are many types of heaters now, and cast aluminum electric heaters are a common type. Usually, the working temperature is maintained in the range of 150-450 degrees. They are widely used in chemical, rubber, plastic machinery, cable machinery and petroleum industries.

Second, if you want to use such a heater device better, you must fully understand its characteristics. Cast aluminum electric heaters have the advantages of excellent thermal insulation performance, strong mechanical properties, corrosion resistance, acid and alkali resistance, and long service life.

Third, when using this type of heating device, the voltage of the working environment cannot exceed 10% of the rated voltage of the equipment, because if the power parameters do not meet the specified requirements, it is likely to cause safety accidents.

Fourth, the wiring part must be placed outside the heating layer and the insulation layer, and it is necessary to ensure that the shell of this type of heating device has a good grounding state.

Fifth, there must be no flammable and explosive items and corrosive gases in and around the operating working environment of this type of heating equipment.

Sixth, the temperature and humidity of the operating working environment must meet the specified requirements. During the installation process, everyone must remember not to use excessive force, which can easily cause damage to the equipment.

Seventh, during the heating process of cast aluminum electric heaters, it is strictly forbidden to burn empty, which can easily cause damage.

Eighth, it is recommended that everyone simply clean the surface of the heating device for dirt or dust after finishing the work every day, which is more conducive to later storage and storage, and prolongs the service life of the heating product.

Ninth, according to the use of this type of heating equipment, formulate a complete maintenance plan, and regularly perform cleaning, care, inspection and maintenance.