Configuration instructions for several structures of high-temperature annealing furnaces

1, Structural Description of High Temperature Annealing Furnace Pulling Machine:
1. The material pulling machine is mainly composed of oil cylinders, brackets, material pulling heads, and stroke devices.
2. The bracket is made of welded steel and steel plates, and the pulling head is a biased structure. The pulling head is fixed on the piston rod of the oil cylinder.
3. The travel device is used for positioning the trolley, mainly composed of guide rods, guide sleeves, and travel switches.
2, Structural description of transfer vehicle:
1. The transfer vehicle is used for the lateral transfer of workpieces and material trays. It mainly consists of a frame and a driving mechanism, which consists of a transmission device, wheels, reducer, sprockets, chains, etc.
2. The deceleration motor adopts an electromagnetic braking system to ensure the correct positioning of the transfer vehicle.
3. There is a set of longitudinal rollers on the transfer vehicle, which facilitates the movement of the material tray.
3, Structural description of oil pressure pump station:
1. The hydraulic station ensures that the electric motor can be smoothly started and system pressure can be established when power is needed, and the electromagnetic directional valve can operate reliably. When no power is needed, the system can automatically unload, saving electricity and reducing the generation of heat energy.
2. The motor power is 22KW, with a high working pressure of 9Mpa, a flow rate of 168L/min, and a fuel tank volume of 1.2m3.
3. The hydraulic station of the high-temperature annealing furnace has a compact overall structure, reasonable layout, and a novel and elegant appearance. The components in the system adopt stacked valves, which are easy to install and adjust, and all components have qualified certificates and are within the storage period.
4. The oil pump electric unit is equipped with shock absorption measures, and a maintenance shut-off valve must be installed at the oil pump suction port for visual shock absorption. The pressure outlet of the oil pump is connected with a high-pressure hose. The system operates smoothly without producing significant impacts or noise. The oil temperature of the system should be controlled between 20 ℃ and 55 ℃, and the higher temperature should not exceed 60 ℃.
5. The fuel tank is welded and enclosed to adapt to harsh environments with dust. The structure of the fuel tank ensures easy internal cleaning and requires overall internal and external galvanizing, rust prevention, and anti-corrosion treatment. The fuel tank is equipped with oil position and oil temperature display.
6. The connection bottom plate of the valve is treated with overall carbonization or bell shaped treatment. The connecting pipes must undergo processes such as internal and external rust removal, acid washing, flushing, acid removal, oil immersion, and bell aging
7. All components and their joints of the hydraulic system are sealed with sealing elements to ensure strict sealing and prevent oil leakage under pressure.
8. The final assembly drawing and the actual product clearly indicate the direction of rotation of the oil pump, and the electromagnetic number is consistent with the schematic diagram.
9. All electromagnetic control valves and signal wires are concentrated on the terminal block inside the junction box.
4, Structural description of the main pusher of the high-temperature annealing furnace:
1. The pushing machine is composed of a pushing oil cylinder frame and a pushing mechanism, and the pushing stroke is controlled by a travel switch.
2. The frame is welded with high-quality steel, which is stable and reliable. It is welded to the foundation embedded parts during installation.