Do not place flammable and explosive materials near the electric heater

Do not place flammable and explosive materials near the electric heater

Electric heaters are a type of equipment commonly used in work and daily life, such as electric stoves, soldering irons, irons, heaters, ovens, and heating stoves. Therefore, the fire prevention issue of electric heaters is very important, and we must attach great importance to their use. After all, life only comes once, and safe and happy use of electric heaters is not only the wish of electric heater manufacturers, but also the desire of us, It is what all of our customers hope for,

Firstly, let's analyze the common causes of fires in electric heating tubes:

1. Place the powered electric heater near flammable or combustible materials, and cause a fire under prolonged high-temperature baking.

2. The electric heater is not equipped with a plug, and the wire head is directly inserted into the socket, which can easily cause a short circuit and lead to a fire.

3. The user did not unplug the plug of the electric heater when leaving, which took too long and caused the electric heater to overheat, igniting nearby combustibles and causing a fire.

4. Continuing to use the resistance wire after multiple repairs can cause overloading of the circuit and trigger a fire.

It is worth noting that the resistance wire of the electric heater in the electric heating furnace is made of nickel and chromium alloy, with a temperature of over 800 ℃. Due to the high power of electric heaters, users may overlook safety and a fire may occur at any time.

Next, let's analyze the precautions to prevent electric heaters from catching fire

1. The wire must be installed with a plug, and the wire head cannot be directly inserted into the socket.

2. The aging and damage of the electric heater wires should be replaced in a timely manner.

3. Electric heaters without fuses installed in the circuit shall not be used.

4. When using an electric heater, it must be watched by someone. When leaving, the plug should be unplugged. During use, if there is a power outage, the plug should also be unplugged in a timely manner and not forgotten.

5. For resistance wires that have been repaired multiple times, it is best to no longer use them and replace them with new ones.

6. Flammable and explosive materials are strictly prohibited from being dried with an electric heater.

7. The electric oven should have a temperature control device to prevent both excessive temperature and prolonged baking time.

Therefore, when using, flammable and explosive materials should not be placed near the electric heater, and a certain safety distance must be maintained. The electric heater must be placed on a non conductive and non combustible material base; The safe cut-off flow rate of the electric heater wire must meet the capacity requirements of the electric heater, and industrial electric heaters must be equipped with a separate circuit under any circumstances.

Www.superbheater.com