During the electroplating process of the electric heating tube, the hanging tool will generate heat and be hot to the hands

During the electroplating process of the electric heating tube, the hanging tool will generate heat and be hot to the hands

With the continuous development of productivity and social progress, various industries are advancing at an unprecedented high speed. However, the three waste materials generated in the production process pose a great threat to the social environment and human health. During the electroplating process, the fixtures may generate heat and heat, which is not entirely due to the high temperature of the plating solution.

Although the heating of the hanging fixture is related to the temperature of the solution, the main reason is:

(1) The current passing through the hanger is too high.

(2) Poor contact on the hanger, increased resistance, and heating of the hanger. The automatic opening and closing device for electroplating treatment tank cover is characterized in that an active shaft, a sliding shaft, and a driven shaft are installed parallel to the opening and closing direction of the tank cover on the treatment tank; Install a driving wheel and a driven wheel on the same side of the driving and driven shafts, and install a rope limit wheel on both ends of the driving and driven shafts. Install a guide wheel component on both ends of the sliding shaft, and install a sensor component at the opening and closing positions of the slot cover on one side of the processing slot; The drive rope is clamped on the driving and driven wheels and tensioned by the tensioning wheel. The two guide ropes are installed parallel to the drive rope and clamped on the rope limit wheels on both sides of the processing groove; One end of the roller shutter groove cover is fixed and rolled onto the driving shaft, and the other end is fastened onto the sliding shaft. The utility model has the characteristics of convenient installation and simple operation.

Www.superbheater.com