Electric heater detection cycle time:

Electric heater detection cycle time:

The high efficiency of an electric heater fluctuates around 20% to 60%. Liquid explosion-proof electric heater is a type of electric heater that consumes electromagnetic energy to convert into energy for heating raw materials that need to be heated. During work, ultra-low temperature liquid substances enter the key inlet according to the working pressure effect of the pipeline, and follow the special heat exchange channel system inside the electric heater vessel.

The approach of applying the basic principles of liquid thermodynamics to design schemes takes away the high-temperature kinetic energy caused by the operation of electric heating materials, causing the temperature of the heated material to rise, and the inlet and outlet of the electric heater obtain the high-temperature material specified in the processing technology.

Daily maintenance, upkeep, and calibration:

1. Carry out maintenance and upkeep according to the instructions in the user manual.

During the entire operation of the equipment, attention should be paid to the scope required by technical standards. If it exceeds the required range, it should be immediately shut down for inspection.

If any abnormalities are found during the entire operation of the equipment, the heater should be immediately powered off for inspection.

4. All electric heaters should be operated in a clean natural environment.

5. Keep timely records of the operation and maintenance of the electric heater equipment.

During the idle period of the electric heater, it should be operated every period of time to ensure that the equipment has excellent standby status.

During the normal application period, the equipment should be kept clean to avoid loosening and rusting of various components. If any loose parts are found, they should be tightened immediately.

8. Attention: It is prohibited to open the electric heater cover by induction power! Do not damage the explosion-proof surface! The yield stress of the anchor bolt is ≥ 640MPa (grade 8.8)!

Maintenance during operation:

When the electric heater equipment is running, it is necessary to observe the operation of the equipment anytime and anywhere. If any abnormalities are found, the power should be immediately cut off and resolved.

Detection cycle time:

1. The electric heater should be repaired every time it is raised and then delivered for use again;

2. Electric heater maintenance should be carried out once a year;

All normal maintenance procedures flow:

Only staff who have undergone professional learning and training can start the machine for maintenance and repair work.

In addition to following the safety operating procedures of the equipment, attention should also be paid to the following safety precautions:

3. Maintenance work can only be carried out when the power of the electric heater is turned off.

4. Before starting up, make sure that there are no special tools, parts, or other items left in the electric heater.

5. Regularly maintain the safety status of the wire joints of the electric heater equipment.

6. If any abnormalities are found during the operation of the electric heater equipment, it should be immediately powered off for inspection and implemented according to the user manual.

Maintenance and upkeep during long-term parking:

When the electric heater is shut down for a long time, the switch power should be completely disconnected, and rust prevention measures should be taken to solve the problem

Www.superbheater.com