Electric heaters and heavy oil electric heaters have different operating procedures

Electric heaters and heavy oil electric heaters have different operating procedures

Electric heaters are widely used in equipment processing in the mechanical industry. Familiar with automatic packaging machines, packaging machines, and other equipment, it is necessary to use electric heaters to package and process products. Of course, electric heaters may also malfunction during use, especially when burned out and internal system short circuits occur. Once a short circuit fault occurs in the internal system of the electric heater, if it is not eliminated in a timely manner, the quality and use of the product cannot be guaranteed, and even the internal system of the electric heater may be damaged, causing serious losses. So we need to find ways to avoid internal system failures in electric heaters.

Electric heaters and heavy oil electric heaters have different operating procedures and must be strictly followed to ensure their full effectiveness. Before operating the electric heater, it is necessary to make sufficient preparations, mainly checking the instrument parameters in the liquid level gauge, explosion-proof junction box, and control cabinet. If there are any problems, they should be solved in a timely manner to avoid damaging the electric heater.

When wiring, the electric heater and explosion-proof junction box should be grounded reliably to eliminate hidden dangers. When there is no medium flowing in the electric heater, it cannot be used to avoid burning out the electric heater. The working parameters of the equipment cannot be changed arbitrarily to avoid problems. If the electric heater is not used for a long time, all circuit breakers should be cut off and stored properly.

When the electric heater stops working, it should be cooled first to avoid excessive temperature and damage, and then subsequent cleaning and storage work should be carried out. Heavy oil heater is an energy-saving device that can preheat or reheat fuel oil in advance. Installed in front of the combustion equipment, to achieve heating of the fuel oil before combustion, reduce the viscosity of the fuel oil at high temperatures, promote full atomization combustion, and achieve energy-saving goals.

Heavy oil heaters have the advantages of high power, small size, fast heating, high temperature control accuracy, networking with computers, wide application range, long service life, and high reliability. They have been widely used in pre heating or secondary heating platforms for fuel oils such as heavy oil, asphalt, and clear oil. Before using the heavy oil electric heater, the electrical insulation should also be checked to ensure it meets the specified requirements. If it does not meet the requirements, the bypass valve should not be opened when the heavy oil electric heater is turned on to avoid unnecessary malfunctions. The heavy oil electric heater should be checked accordingly, such as whether the voltage and current are normal, and whether the terminals are overheated, to ensure its normal use.

www.superbheater.com