Emergency treatment methods for oil leakage and fire in tubular furnaces

Cut off the gas from the bypass valve at the gas self regulating valve, and slow down the fire to prevent backfire and explosion.
Close the rich oil inlet valve at the rich oil outlet of the poor rich oil section heat exchanger to prevent the rich oil from continuing to leak out and exacerbate the spread of the fire. Close the rich oil pipeline of the outlet tube furnace at the valve at the rich oil inlet pipe of the benzene removal tower to isolate the tube furnace from other pipelines. Surround the leaked oil with sand and soil to prevent the fire from spreading.
If the fire is not strong, it can reach the fire steam location in the furnace and open the fire steam valve in the furnace to extinguish the fire.
Connect the foam fire station foam from the joint at the entrance of the foam fire station with a fire hose. Use foam to extinguish the fire of tubular electric furnace.
The key is to control the outflow of gas and rich oil to prevent the fire from intensifying and extending to reduce losses.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!