Features and parameters of PCB desktop curve board splitter

The curve board splitter is also called a fully automatic board splitter or a milling cutter board splitter. It is a board splitter used to split PCB fiberglass boards connected with stamp holes. Place the PCB panels to be split in the corresponding position of the lower mold and press the start switch with both hands to perform a one-time board splitting operation. During work, the lower mold is automatically pushed and pulled to reduce labor intensity and improve safety. At the same time, it is very convenient to take and put the finished products. The following editor will introduce the characteristics and parameters of the PCB desktop curve board splitter. Welcome to read!

Features of PCB desktop curve board splitter:

1. Desktop single-table cutting machine, speed up to 100mm/s, positioning speed 600mm/s.

2. The shaft system enables the system to accelerate and decelerate quickly, reduce synchronization time, improve productivity, and maintain high precision.

3. The hardware used is high steel and high performance.

4. All lead screws are covered to prevent dust and dirt from entering, thereby improving the life and performance of the shaft.

5. Avoid problems such as tin cracking and parts damage caused by manual folding.

6. Avoid using punching or folding to avoid mechanical stress problems.

7. Suitable for cutting arcs and lines of finished boards.

8. Suitable for cutting small multi-plates, such as mobile phone substrates, PDAs, PC interface cards, etc.

Parameters of PCB desktop curve splitter:

1. Drive system motor: stepper servo motor

2. Spindle: high-speed spindle

3. Cutting performance: 600mm/s

4. Drive system repetition accuracy: ±0.02mm

5. Cutting speed: up to 100mm/S depends on the circuit board material and cutting quality

6. Resolution: ±0.01mm

7. Configuration: X, Y, Z three axes, stroke: 600*400*100mm, stroke can also be customized.

8. Repeat cutting accuracy: <0.05mm, for straight and curved contours <>

9. Circuit board positioning: special or standard fixture

10. Loading and unloading method: manual method

11. Circuit board thickness: 0.4mm-4mm

12. Safety settings: whole machine emergency stop switch, spindle emergency stop switch, spindle motor overheat and servo motor overload detection

13. Spindle motor: power: 0.3 kW

Maximum speed: 60,000 rpm

Cooling method: air cooling

14. Machine size: 950*850*815mm

15. Weight: 73KG

16. Programming method: computer display + CCD teaching

17. Data storage capacity: unlimited

18. Control method: microcomputer control, online teaching programming, CAD file import

19. Transmission mechanism: guide rail + screw rod (Taiwan)

20. Vacuum cleaner: 1.5KW, 220V; size: 710*390*680mm; can work continuously for 24 hours

21. Vacuuming method: bottom vacuuming

22. Safety measures: equipped with protective cover