How is the basic steps of preparing electroplating solution for electroplating electric heating tube:

How is the basic steps of preparing electroplating solution for electroplating electric heating tube:

(1) Put the electroplating chemicals required for the juice amount into the opening tank (small tank) first, and then add an appropriate amount of purified water to dissolve. Be careful not to pour the chemicals directly into the plating tank.

(2) The impurities contained in the solution may first be burned with various chemical facilities and treated with activated carbon.

(3) The solution that has been left standing is filtered into a clean plating tank, and water is added to the standard amount.

(4) Adjust the working specifications of the plating solution (pH value, temperature, reducing agent, etc.).

(5) At the end, the electrolytic deposition is terminated with a low current density to remove the remaining metal ion impurities until the solution is stable.

Elements of electroplating electric heating tube electroplating:

1. Cathode: Electroplated material or other goods, refers to various connector terminals.

2. Anode: If it is a soluble anode, it is the plated metal part to be plated.

If the anode is insoluble, most of it is precious metal or hardware (platinum, iridium oxide).

3. Electroplating potion ingredients: electroplating potions of different concentrations prepared by various types of metal ions to be plated.

4. Electroplating tank or electroplating cylinder: a tank or cylinder that can withstand and store electroplating potions, generally considering environmental factors such as strength, corrosion resistance, and temperature resistance.

5. Rectifier equipment: electrical equipment that provides DC power.

Acceptance requirements for electroplating electric heating pipe electroplating test:

Taking the number of inspections (purchasing batch or times) as the inspection batch, the appearance of large products is fully inspected, and the A test of adhesion is a mandatory inspection item.

Full inspection; Items B and C are destructive tests, subject to random inspection or inspection-free conditions. The appearance of small products is fully inspected. The A test of adhesion is a mandatory inspection item, and random inspection is performed as appropriate; the B and C items are destructive tests, and the random inspection or inspection-free situation depends on the situation.

www.superbheater.com