How to deal with the abrasion of the transmission part of the coater

The coating machine is mainly used for the surface coating process production of film, paper, etc. This machine is to apply a layer of adhesive, paint or ink with specific functions to the rolled base material, and then dry and roll it.
It adopts a special multifunctional coating head, which can realize various forms of surface coating. The winding and unwinding of the coating machine are equipped with a full-speed automatic film receiving mechanism, and the PLC program tension closed-loop automatic control.
During the operation of the coater, the transmission parts are often worn, such as the drying cylinder shaft head of the coater and the roll bearing chamber. The traditional repair methods include surfacing, thermal spraying, brush plating, etc., but there are certain drawbacks: surfacing will make the surface of the parts reach a high temperature, causing deformation or cracks, and even lead to shaft fracture in serious cases; The electroplating coating should not be too thick, and the pollution is serious, and the application is also limited.
The material has good adhesion and compressive strength, which can be removed to repair the abrasion of the coating machine on site. At the same time, it can absorb the impact and vibration of the equipment well and avoid secondary wear due to its concession of metal deficiency.