How to deal with the leakage phenomenon of pipeline electric heaters?

How to deal with the leakage phenomenon of pipeline electric heaters?

A pipeline electric heater is composed of multiple tubular electric heating elements, a cylinder, a guide plate, and other parts. The tubular electric heating element is a high-temperature resistance wire placed inside a metal tube, and the gaps are tightly filled with crystalline magnesium oxide powder with good insulation and thermal conductivity. The tubular electric heating element is used as the heating element, which has the characteristics of advanced structure, high thermal efficiency, good mechanical strength, corrosion resistance, and wear resistance.

Price of pipeline electric heater

Below, the editor will introduce the commonly used leakage treatment methods for pipeline electric heaters. What should be done specifically?

Reason for leakage of pipeline heater:

① Improper clamping size, uneven size (size deviation not exceeding 3mm), or loose clamping bolts.

② Part of the sealing gasket is separated from the sealing groove, and there is dirt on the main sealing surface of the sealing gasket. The sealing gasket is damaged or aged.

③ The deformation of the board caused misalignment in the assembly of the running pad.

④ There are cracks in the sealing groove or two sealing areas of the board. The above are some common external leakage situations, please add. If there is an external leakage, production should be stopped immediately.

In practical life, many working conditions require the use of air duct heaters, mainly used in baking rooms. Let's take a look at the specific characteristics of the air ducts of Suptec?

1. It can heat the air to a very high temperature. The interior of the box is equipped with patented finned tubes, which have high thermal efficiency and fast speed.

2. When the Sputco heater reaches 450 degrees, the shell temperature is only 50 degrees. The exterior of the chamber is insulated and protected by high-quality aluminum silicate cotton for operators. There are businesses in the market that save costs by using rock wool or asbestos as insulation layers, which pose safety risks.

3. Good mechanical performance, the heating element is made of special alloy material, which reflects more stable strength and pressure resistance under high-pressure air flow impact.

4. Dual protection, good security performance. Equipped with protective devices such as temperature controllers and fuses, it effectively prevents the equipment from operating in an extremely mild and windless state, effectively extending its lifespan.

Www.superbheater.com