How to repair and replace a broken hydraulic pump?

The hydraulic pump is the power actuating element in the hydraulic system. After the hydraulic pump of the hot press is used for a period of time, the internal components of the hydraulic pump will reduce the movement accuracy and working performance of the hydraulic pump due to friction, thus affecting the normal operation of the hot press equipment. Leather hot press is also known as bonding machine. According to the different media of hot pressing, it can be divided into tin welding, ACF (anisotropic conductive tape), ACP (anisotropic conductive adhesive), TBF (hot melt adhesive film). It is applicable to the connection of FPC (flexible circuit board), HSC (zebra paper), TAB, LCD and PCB. High-temperature hot press is an electrical and mechanical connection device that heats two parts coated with flux tin in advance to a temperature sufficient to melt and flow solder, and forms a * * * between the parts and solder after curing. The hot press manufacturer has diversified working modes such as single working platform, rotary working platform, left and right mobile platform. So how to repair and replace the damaged hydraulic pump? Replacement and maintenance methods of hydraulic pump of hot press: 1. Replacement of hydraulic pump. If the damaged parts have no repair value or are technically difficult to repair, and spare parts are available, please replace them immediately. The replacement of new parts can usually shorten the maintenance cycle, which is easy to be damaged, and the replacement method is often used. Therefore, it is necessary to do a good job of spare parts so as to replace them in time. 2. Maintenance of hydraulic pump. It is a repair method that compensates the shape and size of parts by welding, repairing, electroplating, turning, grinding and other methods to maintain the original accuracy and sealing performance requirements. Generally, repair requires less effort than manufacturing new parts, so as long as the structure or performance of the parts allows, it is usually economical in terms of time and cost of using repair methods. If the hydraulic pump is found to be faulty, it should be repaired or replaced according to the specific conditions of the hydraulic pump damage,