How to repair the small water output of Meida solar energy

Zhejiang Meida Industrial Co., Ltd., the top ten brands of integrated environmental protection stoves, Zhejiang famous brand products, listed companies, the core enterprise of China's top 500 private Meida Group, the founder and leader of China's integrated stoves industry, Zhejiang high-tech enterprise, with multiple national patents, and products listed in the national torch plan project
1、 Reasons for low water output from solar energy
1. Water pressure issues with solar water heaters
For conventional solar water heaters, the pressure is determined by the installation height. The higher the solar water heater is installed, the greater the water pressure (such as in a unit building). In rural areas, it is normal for a one-story bungalow to have a low pressure on the hot water. It can be concluded that the smaller the drop, the smaller the outflow.
2. Didn't clean
The solar water heater may have been in use for a long time without timely cleaning, a large amount of scale has accumulated in the pipeline, and debris has accumulated on the filter screen at the pipe outlet, causing a blockage. This can lead to too small water output when turning on the faucet or basin switch.
3. The pipe diameter is too small
When installing a solar water heater, the pipe material chosen is too small in diameter, resulting in too little water flow.
2、 Solution to small amount of hot water from solar water heaters
First, check and inspect the pipes, faucets, and other components
① If it is more than two years old, first check to see if there is scale on the sprinkler (nozzle)
Solution: You can unscrew the shower to see if the water volume is still small, which may be caused by excessive scale in the water mixing valve.
② The problem with the faucet itself is that the manufacturing of the water outlet is not precise, resulting in clogging of the water outlet and low water flow
Solution: Replace the faucet with a new one.
③ The position of the joint between the faucet and the water pipe. Generally, the joint between the faucet and the water pipe requires wrapping a raw material tape around the faucet, which has achieved a sealing effect. It may be that the wrapping of the raw material tape is not precise, and a part of it falls into the inside of the water pipe, resulting in blocking the water flow
Solution: Replace the raw material tape and wrap it carefully and finely;
Ask a professional to check whether the water heater is in good condition
During the use process, it is necessary to do a good job of maintenance and cleaning, timely clean up the blockage, and ensure that the water is kept in a smooth state during the transportation process.
3. Change the size of the solar water pipe
This can effectively improve the amount of water delivered, and it can also avoid the obstruction of some small blockages, resulting in too small water output.
4. Install the booster pump
If the water pressure is insufficient due to installation location constraints, a booster pump can be installed. A hot water booster pump can be installed at the hot water outlet of the water heater to effectively increase the water pressure, which will result in a large water output

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!