How to select quick connector?

1. Type and temperature of fluid (please select the quick connector with body material and sealing material suitable for the type and temperature of fluid)

Depending on the fluid, the suitable body material and sealing material are different. For example, if the quick connector is for air, steel is recommended, and if it is for water, brass or stainless steel is selected.

2. Liquid pressure (please select a quick connector with pressure resistance suitable for fluid pressure)

Fluid pressure is also the key to selecting a quick connector. The quick connector for oil pressure is a series between 5.0Mpa (51kgf/cm²)-68.6Mpa (700kgf/cm²), and the structure of the quick connector is also different according to the pressure resistance characteristics.

3. The structure of the automatic switch valve (please select a quick connector with a valve structure suitable for piping purposes)

For the structure of the valve, there are two-way switch type, one-way switch type and two-way open type. Because when separated, except for the two-way switch type, fluid flows out of the piping. So please pay attention.
4. The use environment of the quick connector (please select a quick connector with a structure and material suitable for the use environment)

Consider the type, body material, and sealing material of the quick connector in combination with the humidity conditions, dust conditions, and corrosion-prone use environment.

5. Confirm that the selected quick connector connection threads are consistent

When using products of different brands, it is best to use the female and male heads of the same brand together. If you must use them crosswise, it is best to consult the technical staff of the product supplier before use and use them after confirmation.

6. The shape and size of the installation (please order the product after determining the final shape and size)

Please determine the model and material of the quick connector, and specify the assembly shape and size corresponding to the piping characteristics. Please note that the size is related to the fluid flow rate.