How to solve the dripping phenomenon of wine filling machine

1. Check the mechanical problems of the filling machine itself, and check whether the ball valve in the filling machine is damaged or loose. If it is caused by internal ball valve, the solution is to replace the internal ball valve. If the internal ball valve is damaged and cannot be repaired, it can only be replaced with a new ball valve.
2. Check whether the syringe assembly is clean. If it is not clean, it will lead to dirty blockage between the inner and outer pipes. Therefore, the syringe should be removed, cleaned, disinfected and maintained.
3. Check whether the fuel injector is in good condition. If the filling nozzle is damaged, the filling machine will leak during operation. Replace the damaged feed nozzle, check whether other feed nozzles are used, aged or corroded, and replace them as soon as possible.
4. Check whether the O-ring is corroded or worn. If the O-ring is corroded or worn, it can also cause the filler to drip. Therefore, it is recommended to replace the O-ring in this case.
5. Check the position of the barrel. Check whether the oil cylinder is in the central support position of the oil cylinder and whether the piston and piston rod of the oil cylinder are firm. If they are loose, lock them. If the fault position of the cylinder changes, it is necessary to reinstall the cylinder and confirm that the position is correct.
Although the leakage problem of the filling machine is not serious, if the leakage problem of the filling machine is not solved, it may affect the efficiency and quality of our follow-up work. Therefore, we should pay attention to the leakage of the filling machine, solve the problem in time, and then improve the service life of the wine filling machine, and the quality and quality of the product will also be improved.