Instructions and common problems for using alcohol based gasifier heads

Instructions and common problems for using alcohol based gasifier heads

1, Product Description

The heating ring of the alcohol based gasifier produced by Xuanyuan Technology uses tubular electric heating elements as the heating element and is bent into shape. It is then centrifugally cast into a hollow cylindrical body using high-quality national standard aluminum ingots as the outer shell when entering the mold. The standard size is an inner diameter of 89, and the methanol pipe is a 6-meter long 304 stainless steel pipe. The inner wall of the furnace head is bonded with high-quality stainless steel and integrated with the furnace core casting, ensuring long-term use without detachment. The wiring is threaded and can be directly installed with ceramic caps, which is beautiful and safe. The main fuel used in alcohol based gasifiers is methanol fuel, which has the advantages of low fuel consumption, much higher firepower than liquefied gas, and more cost-effective, safe, and environmentally friendly use. The working temperature of the furnace head is generally 160-200 ℃, and methanol can achieve the best gasification effect in this temperature range. It first heats and gasifies high-energy alcohol based synthetic oil into gas through its own system at high temperature. Under high pressure, it is sprayed and burned through multiple injection holes, reducing oil loss and heat loss. The combustion temperature is higher, so the energy-saving effect is more significant, and fuel can be saved by 30-50%.

2, Application scope

Widely used in hotels, restaurants, guesthouses, canteens, fast food, food stalls, restaurants, etc.

3, Installation and instructions for use

1. Alcohol based gasification heating ring (taking 89 # as an example)

1964359983_1332438607.jpg

2. Installation diagram of gasifier head and accessories

1964762189_1332438607.jpg

3. Installation diagram of furnace head and controller

4. The use and settings of the controller (Yancheng Xuanyuan Technology)

A, Usage: Wiring the quick connector for the mother and son: Two red wires are connected to a 220V power supply, two black wires are connected to a heating wire at the furnace head, and a single temperature control wire is connected to the furnace head. Connect the power supply and press the start stop button to enter standby mode. At this time, the system enters heating mode. Wait until the heating indicator light flashes, use the joystick to light the fire, adjust the firepower to the 4th gear, and the height of the oil barrel is at least 1 meter or more. Drain the air from the oil pipe. Once oil sprays out, the fire can be started. The above defaults to the joystick gear mode. If you need to enter the micro gear adjustment, you can press the switch button.

B, Yancheng Xuanyuan Technology Controller Settings: The parameters of the controller are set before leaving the factory, but according to the specific usage environment and requirements, adjustments can be made according to the following instructions

www.superbheater.com