Knowledge of safe use of electric heaters in cold weather

Knowledge of safe use of electric heaters in cold weather

In winter, electric heaters and heaters instantly become the most popular industrial heating equipment. Due to the economic benefits of air heaters and the convenience and portability of the equipment, they can warm up anywhere you go. Therefore, when the climate is cold, major heating facilities become chaotic and busy. At this point, there will always be fires caused by improper use of industrial heaters. To ensure the safe use of industrial air heaters and prevent fire incidents, the following fire prevention methods should be adopted:

1. Do not place the heater directly around the power socket, and do not touch the heating elements inside the heater with your hands to prevent danger;

2. The temperature of the air outlet pipe and the air supplied by the industrial heater can be very high, so be careful to prevent burns;

3. The address of industrial heating fan equipment should be kept away from flammable, explosive and other hazardous materials and gases to prevent danger from occurring;

4. It is not allowed to use the heater in any place with water or relatively humid conditions. If water drips onto the working heater, it may cause a short circuit or leakage of electricity;

5. In case of an emergency, you can directly press the emergency brake button to shut down the machine. After safety is ensured, you can reset and resume work;

6. Industrial air heaters have excellent ventilation and should not be used in sealed boxes;

7. Before using the heater, it is necessary to check whether the voltage and current meet the requirements of the machine. A grounded socket must be used, and the wires must meet the requirements. The buried ceramic heating tile thermal conductor uses quartz glass with a silicon content of over 95% and high temperature resistance of 1800 degrees as the main raw material. After chemical reaction, silica is formed, which has far-infrared performance. The surface glaze layer is composed of various oxides with good radiation performance. After high-temperature sintering, it has advantages such as smoothness, aesthetics, wear resistance, anti-corrosion, etc.

Www.superbheater.com