Maintenance knowledge of semi-automatic plastic suction machine

The semi-automatic plastic suction machine has simple structure, convenient operation, high efficiency and high degree of automation.
Semi-automatic plastic suction machine is applicable to the production of plates: acrylic acid, polyethylene polystyrene, PVC, polymethylmethacrylate and polymethylmethacrylate; Flocked bed sheets; APET, polyester, polypropylene and other environmental protection plates. Photodegradable materials; Biodegradable materials and other plastic products.
Semi-automatic blister machine is mainly used in plastic packaging industry (blister packaging, plastics, batteries, toys, gifts, hardware, household appliances, electronics, stationery and decoration); Food packaging industry (fast food box, fruit plate, biscuit box); Pharmaceutical industry (pill packaging, tablet packaging); The cooling water deflector and other three-dimensional relief patterns of the industrial cooling tower are used in the manufacturing industries such as decoration, plastic ceiling, wallboard, automobile materials, sanitary equipment, etc.
Maintenance knowledge of semi-automatic blister machine:
1. Before each start, check whether the air pressure and voltage are normal.
2. Whether the triple oil-water filter contains water, whether the oil cup of the oil mist injector contains oil, and whether the oil mist injector provides oil when the machine is running.
3. Is the cold water supply switch on.
4. Whether the circulating oil of vacuum pump is in the normal interface.
5. Add lubricating oil to the running-in part of the equipment regularly: a. Add lubricating oil B to the guide rod once a week, and add lubricating oil B to the bearing position every three months
6. Each shift shall regularly check whether the fixing screws of each mechanism are loose or falling off.
7. Check the sharpness of the flying knife before starting every day.
8. Keep the equipment clean and the surrounding environment clean.