Meltblown slitting machine operation start

1. Turn on the electrical isolation switch (set in front of the electrical control cabinet), press the EMERCENCY STOP RESET and READY TO RUN buttons, the key opens the MACHINE to RUN (on the main operating platform) to check the voltage (380V), the current is correct and stable.

2. Turn on the power switch of the hydraulic system (set on the main hydraulic drive frame), and check whether the oil level and pressure gauge of the main hydraulic drive system are correct and stable.

3. Open the pneumatic shut-off valve (set on the intake pipe under the pneumatic control cabinet), check whether the air pressure is correct (not less than 6.0bar) and stable.