Knowledge

Plastic hot plate welding machine has different welding dimensions and specifications due to different application occasions and welding materials. Its output power ranges from hundreds of watts of ma

The temperature controller controls the temperature range. After the temperature is set, it can be adjusted automatically. The actual temperature and expected heating temperature are displayed on the

This part adopts the sliding plate structure, and the heat of the heating plate is transferred to the welding surface of the upper and lower plastic heating parts by the electric heating method. Melt

Touch screen and (programmable) controller, magnetic switch, and electric heating tube. The electrical part is mainly divided into two parts: the hot plate temperature control system of the hot plate

The control part consists of PLC and temperature controller. The main functions are as follows: first, control the pneumatic transmission system to open the gas circuit valve under timing control duri

This part includes: filter, pressure reducing valve, oil mist, commutator, throttle valve, cylinder, etc.When the plastic hot plate welding machine works, firstly, the air compressor drives the stroke

The plastic hot plate welding machine is composed of pneumatic transmission part, control part, electrical part, machine table, hot plate mould and mechanical device

Hot plate plastic welding machine mainly welds plastic parts through a heating plate controlled by temperature. During welding, the heating plate is placed between two plastic parts. When the workpiec

It can weld PP, PE, HDPE, PVDF plastic plate, pipe and other thermoplastic products. Especially for the welding of large-diameter pipes, anti-corrosion cylinders, waterproof film, environmental protec

Set time welding mode / revolution welding mode to meet the requirements of positioning or non positioning welding. The rotating speed (RPM) is precisely controlled, and the welding of circular plasti

Pressure, rotating speed (RPM), revolution / cycle (RPC), welding time, pressure holding time. The welding quality is controlled by monitoring rpm, RPC, torque and other parameters.

The spindle rotation drive adopts precision servo motor with high torque output and angular positioning. The rotation precision is controlled within 1o. The process control adopts programmable control