Knowledge

This paper summarizes the technical status of existing rubber vulcanization equipment, puts forward an electromagnetic heating drum vulcanizer with energy saving, high efficiency and high product qual

When using the traditional flat vulcanizer, the semi-finished product (rubber blank) after mold closing is always in a static pressure state, and the mold is also static. When the drum vulcanizer work

In particular, the utility model relates to a main device of a high-efficiency flat vulcanizer, which comprises a frame, a vulcanization chamber arranged on the frame, a steam generating part arranged

It mainly solves the problems of low automation and difficult to guarantee the qualified rate of vulcanized products in the production process of the existing bearing rubber sealing ring A mold guide

The utility model is characterized in that the sealing ring is composed of a tetrafluoroethylene sealing ring embedded with a spring sheet metal skeleton, and the cross section of the sealing ring is

The lower part of the rotating cylinder is provided with a connector, the upper side of the rotating cylinder is provided with a sealing ring, the upper side of the rotating cylinder is provided with

The uniform heating design of microwave heating equipment is particularly important. The heating uniformity design of microwave heater is the premise of rubber uniform vulcanization. In addition, the

When vulcanizing the rubber strip with framework, the front section of the extruder is also equipped with steel core supply equipment, and the rear section is sometimes equipped with punching machine,

It is used to cool the rubber strip to a temperature that can be used for cutting, collection and other operations.

Keep the rubber strip within the temperature range required for vulcanization and continue vulcanization.

Using microwave heating speed to heat the whole to the temperature required for vulcanization, this process only takes tens of seconds to one or two minutes.

It is mainly used to vulcanize and shape the surface of the rubber just extruded at high temperature to prevent its deformation or adhesion with the conveyor belt from damaging its surface.