Knowledge

1. The contact surface where the heating plate is installed should be flat and free of unevenness. 2.This heating plate should be placed dry, avoid immersion in water to affect its insulation performa

Electric heating alloy materials should first have a relatively high resistivity. The electric heating element made of high-resistivity material has high electrothermal conversion efficiency; the volu

One of the characteristics of electric heating alloy material that is different from ordinary conductive materials is that it has certain requirements for the resistivity of the material. Ordinary con

It is made of electrothermal paint (imported product) to form a cured coating on the heater radiation surface. Because of its high surface blackness, the coating can absorb a large amount of radiant h

1. The form of paper is not the same The inner lead is the lead of the single-head heating tube indirectly drawn from the tube, and the external report is drawn from the heating tube by the receiving

1. Single-head tube mold heating: (single-head) or (cartridge) electric heating tube (Cartridge Heaters). In China's electric heating industry, there is a long-term model: M3. In the late 1990s, elect

When communicating with customers about the technical parameters of the single-head tube, what we must determine is the specific size, power and working environment of the electric heating tube. Why d

1. Fully understand the operating conditions of the single-head tube, whether it is medium propagation or red inner line radiation. 2. Fully understand the application heat of the single-head tube, an

Conventional shape single-head tubes are generally divided into: high power density (external surface area power of the heating zone electric heating tube 12-25N/cn2); medium and low power density (ex

.1. Place the recycled electric heater near combustible or explosive materials, and cause a fire under low-temperature baking in a short period of time. 2. The electric heater is not equipped with a p

This machine is suitable for polishing and wire drawing of large round tubes of various materials. The feeding wheel is made by grinding three times, mixed with silica gel, resistant to high temperatu

Stainless steel single-head pipes will not rust under normal circumstances, but when exposed to chlorine or harsh environments, especially after the passivation layer on the surface is mechanically or