Knowledge

The limit sleeve is a tubular part used to limit the minimum closed height of the die, and is generally sleeved outside the guide post. The limit post is a cylindrical piece that limits the minimum cl

The ejector is a rod-shaped part that directly or indirectly ejects the process (sequence) piece or waste by the upward movement. The top plate is a plate-like part that moves in the die or module, an

The side edge is a punch that cuts a feeding positioning notch on the side of the strip (belt, roll) material. The side pressure plate is a plate-shaped part that exerts pressure on one side of the st

The continuous die is a die with two or more stations, and the material is fed into one station successively with the stroke of the press, so that the punching piece is gradually formed.

Guards are plate-like parts that prevent fingers or foreign objects from entering the danger zone of the die. The pressure sill is a special name for the pressure rib with a rectangular cross-section.

The pressing rib is a rib-like protrusion used to control the flow of the material in the drawing die or deep drawing die. individual parts.

The blanking plate (ring) is a part in the die used to press the stamping material or the process part to control the flow of the material. In the drawing die, the blanking plate is mostly called the

The punch is a convex working part in the die that directly forms the punching part, that is, the part whose shape is the working surface. The concave die is a concave working part that directly forms

1. The blister forming film cannot absorb, one is that the vacuum negative pressure is not enough; the other is that the heating time is short or the heating temperature is not enough. 2. The blister

Regularly drain the accumulated water in the air filter of the air source triplet, add an appropriate amount of lubricating oil to the lubricator, and adjust the amount of oil mist to an appropriate a

Machine tools should be kept clean. Remove the worktable panel regularly, and clean the dust on the bottom of the worktable and the vacuum filter to make the vacuum pipeline unobstructed. Regularly ch

Use a blade to cut the PVC around the workpiece and remove the workpiece and excess PVC. For example, the temperature of several kinds of PVC: 1) 2mm Taiwan 43~45℃, 2) 0.35mm Taiwan 53~56℃, 3) 0.4mm T