Knowledge

The utility model is characterized in that the sealing ring is composed of a tetrafluoroethylene sealing ring embedded with a spring sheet metal skeleton, and the cross section of the sealing ring is

The lower part of the rotating cylinder is provided with a connector, the upper side of the rotating cylinder is provided with a sealing ring, the upper side of the rotating cylinder is provided with

The uniform heating design of microwave heating equipment is particularly important. The heating uniformity design of microwave heater is the premise of rubber uniform vulcanization. In addition, the

When vulcanizing the rubber strip with framework, the front section of the extruder is also equipped with steel core supply equipment, and the rear section is sometimes equipped with punching machine,

It is used to cool the rubber strip to a temperature that can be used for cutting, collection and other operations.

Keep the rubber strip within the temperature range required for vulcanization and continue vulcanization.

Using microwave heating speed to heat the whole to the temperature required for vulcanization, this process only takes tens of seconds to one or two minutes.

It is mainly used to vulcanize and shape the surface of the rubber just extruded at high temperature to prevent its deformation or adhesion with the conveyor belt from damaging its surface.

It is used to extrude rubber raw materials into the required shape and structure. The extruded rubber is divided into single-layer rubber (sponge or solid core rubber), two-layer composite rubber (spo

It consists of extruder, high temperature setting equipment, microwave vulcanization equipment, hot air vulcanization equipment, cooling section, tractor, cutting machine, punching machine, etc.

It is to penetrate the microwave energy into the heated medium for direct overall heating. Therefore, the heating is rapid, efficient and energy-saving, which greatly shortens the rubber vulcanization

In production, a series of processing processes should be carried out for the raw rubber. Under certain conditions, the raw rubber in the rubber will react with the vulcanizing agent to make it cross-