Knowledge

From the engineering point of view, the silicon conduction heating sheet is designed to match the irregular surface of the material, adopt high-performance heat-conducting materials and eliminate the

With the advent of the era of integration of various electronic devices, electronic machines put forward higher requirements for circuit miniaturization, high density, versatility, high reliability, h

For industrial precision soldering, it has the characteristics of rapid temperature rise, accurate temperature supplement and stable temperature control. Its styles are diverse, including two electrod

By combining various HTCC ceramic heating components with radiators such as heat dissipation aluminum corrugated sheets, HTCC heating components can be made, which can be used for various electrical a

The seven hole chip can accurately control the output resistance value of multiple electrode points, and the balance deviation of two arm resistance values is controlled within 1%. It is used in the c

The circular heating plate can be in various forms, including a small circular positioning plate, a large-area circular heating plate without inner hole with a diameter of 100mm, and a large-diameter

Arc heating element is a special ceramic heating element developed after flat heating element. In addition to the advantages of rapid temperature rise, high thermal efficiency, uniform heating, no ope

The specifications of conventional flat plate heater include 7015, 7010, 7007, 6007, 7030, 7020, 6015, 6010, 5015, 5010 and other common specifications.

Energy saving, high thermal efficiency, 20 ~ 30% less power consumption per unit heat than PTC. The surface is safe and uncharged, with good insulation performance: it can withstand the withstand volt

High temperature co fired ceramic heating element (MCH) is a new generation of medium and low temperature heating element produced by printing resistance slurry directly on Al2O3 alumina ceramic green

The temperature rises rapidly, reaching the rated 100 ℃ ~ 230 ℃ in 10 seconds; Up to 500 ℃ ~ 700 ℃ in 30 seconds. High thermal efficiency, energy saving, pollution-free, in line with environmental pro

Substrate: white Al2O3 ceramic with content not less than 95% Lead wire: 0.5mm nickel wire or nickel copper wire Casing: Teflon