Performance and characteristics of moisture-proof paper coating machine

1. The entire machine is controlled by a 5 frequency conversion motor, and the tension (unwinding, coating, traction, and winding) of the entire machine is automatically controlled by a Japanese Mitsubishi PLC system. The reliability of the tension of the entire machine is improved through human-machine interface touch screen control and display.
2. The feeding rack is in the form of electric flipping dual stations and adopts magnetic powder automatic tension control.
3. Mesh coating method, the coating scraper shaft adopts a heavy-duty dual axis mechanical independent movement, and the scraper adjustment method is manual with pneumatic, with arbitrary angle adjustment. The coating amount depends on the mesh line of the mesh roller, and different coating amounts can be exchanged for different mesh lines of the mesh roller.
4. To achieve uniform coating, one set of uniform adhesive rollers is equipped, controlled by a motor frequency converter.
5. The transfer coating of the Meier rod adopts a stainless steel wire scraper rod supported by the rod holder. The coating amount depends on the wire thickness of the stainless steel wire scraper rod, and different coating amounts can be exchanged for different thicknesses of stainless steel wire scraper rods.
6. The oven is 30 meters long and has 10 independent temperature control sections. Electric heating is used for heating, and the hot air enters the drying system. The adjustable internal circulation suction and exhaust device has strong air intake and exhaust forces, ensuring thorough drying.
7. The guide wheel inside the oven adopts active synchronization with the host, and the transmission adopts a grid conveyor belt transmission type to reduce material stretching and deformation. The air top oven and film piercing operation platform make it easy for operators to work.
8. The tension synchronization between the coating roller and the traction steel roller is controlled by a floating swing arm;
9. Automatic meter and speed control device;
10. EPC edge alignment machine is used for correction, in order to ensure the neatness of material winding.
11. The retractable shaft adopts a key type inflatable shaft for convenient loading and unloading operations.
12. High precision upward pressure traction device, steel roller cooling using water circulation, through the cooling roller to make the film smoother, more scraping, and achieve better cooling effect.
13. The form of the material receiving rack is edge winding, and the winding drive and traction are used together.