Precautions for using high temperature heating plates

The high-temperature electric heating plate's housing is deep-drawn cold-rolled steel with an electrostatically sprayed plastic coating. The heating plate's surface is made of ceramic, with automatic temperature control and corrosion resistance. It is durable, safe, and reliable. Its stylish design, easy operation, and excellent performance ensure it performs reliably, with no cracking or shedding after repeated hot and cold cycles. The high-temperature electric heating plate can be used with various flasks, beakers, and Erlenmeyer flasks, and is suitable for heating and maintaining the temperature of various liquids in scientific research, chemical engineering, oilfields, pharmaceuticals, laboratories, and analytical labs. High-temperature electric heating plates are widely used for baking, drying, and other temperature experiments, making them essential tools in biology, genetics, medicine, environmental protection, biochemistry, analytical labs, and teaching and research.

Precautions for Using High-Temperature Electric Heating Plates

1. When using this type of heating device, please ensure that its continuous operating temperature is below 240°C and that its transient operating temperature does not exceed 300°C.

2. For adhesive mounting, the permissible operating temperature is below 150°C.

3. For dry-burning operation, the power density should be less than 1W/cm² due to the material's temperature resistance. For non-continuous operation, the power density can reach 1.4W/cm².

4. The operating voltage is selected based on the principle of high power for high voltage and low power for low voltage. Exceptions may be made for special needs.

5. A power supply that meets the instrument's requirements must be used. The power outlet should be a three-hole safety socket with a ground wire installed.

6. A slight amount of smoke may be produced during initial use, which is normal.

7. During operation, prevent the heating medium from overflowing the container and flowing into the cabinet, potentially damaging the appliance.

8. If a malfunction occurs during operation, disconnect the power cord before repairing.

9. Dry-burning is prohibited.