Silicone rubber heaters should be used with caution

Silicone rubber heater, as a common electric heating element, mainly converts electrical energy into thermal energy. It can be used in various electric heating equipment or can be used alone. The process control during the use of the insulation cover and its impact on the precision rolling process were analyzed. By statistically analyzing, categorizing, and organizing the on-site measured data of the hot rolling production line, the main reasons for the temperature drop of the strip on the intermediate roller conveyor were analyzed. New energy vehicle battery heater solves the heating system solution for low-temperature environment charging of power batteries: The silicone heating system is a thin and pure resistive heating element, which is very soft and has a thickness of 1.5mm. The battery energy storage heater is very thin, lightweight and flexible With this heater, you can transfer heat anywhere you need, improve heat transfer, accelerate heating, and reduce power requirements during processing.

It is reported that silicone rubber heaters often leak or shorten their service life when used alone. We remind customers that such issues are more likely due to the use of substandard products (here we recommend high-quality silicone rubber heaters). On the other hand, we remind customers to pay attention to the following points during use:

When silicone rubber heaters are used to heat easily melted materials such as nitrates, paraffin, asphalt, etc., melting the heated materials first can reduce the external voltage of the silicone rubber heater, and after melting is completed, it can be restored to the rated voltage. In addition, when heating explosive substances such as nitrates with silicone rubber heaters, safety measures should be fully considered.

When using a silicone rubber heater for air heating, attention should be paid to the uniform arrangement of the silicone rubber heater. The benefit of doing this is to ensure that the silicone rubber heater has sufficient and uniform heat dissipation space, ensuring air flow as much as possible, and improving the heating efficiency of the silicone rubber heater.

The internal gap of the silicone rubber heater is filled with magnesium oxide sand. The magnesium oxide sand at the outlet of the silicone rubber heater is prone to environmental pollution due to the infiltration of these impurities and water. Therefore, we need to pay attention to the condition of the outlet of the silicone rubber heater during actual operation to avoid electrical leakage safety accidents that enterprises may cause.

The storage location of silicone rubber heaters may need to be kept dry and appropriately insulated.

When using a silicone rubber heater for liquid or metal solid heating, it should be noted that the silicone rubber heater can be completely placed in the heating object and empty combustion of the silicone rubber heater is not allowed. If there are scales or carbon on the outer metal tube shell after use, please remove the silicone rubber heater in a timely manner to avoid affecting the cooling performance and service life of the silicone rubber heater.