Specifications and uses of high-temperature electric furnace wire products:

Specifications and uses of high-temperature electric furnace wire products:

Material: Cr20Ni80, Cr15Ni60.

Specifications: φ 0.03mm~ φ 1.0mm

Usage: Nickel chromium material has high high-temperature strength and strong plasticity.

Widely used in industrial furnaces, household appliances, and far infrared devices. When using a flange heating tube, the temperature measuring tube and heating part of the temperature controlled heating tube must be completely immersed in the liquid to effectively avoid dry burning of the heating tube and causing damage; In this way, a heating tube with a temperature control structure can not only effectively measure the temperature of the liquid to control the operation of the heater, but also to some extent avoid damage caused by dry burning of the heating tube.

Heating pipes are widely used in industrial liquid heating, but the selection of different liquid heating pipes also varies. For example, for corrosive liquids, heating pipes made of Teflon material are usually used to heat the liquid; For example, heating the liquid in a water tank is much simpler. However, due to the power of the heating tube and environmental factors, there are differences. Common types of heating in the water tank include flat flange electric heating tubes, threaded flange heating tubes, wall mounted flange heating tubes, single U-shaped stainless steel heating tubes, and U-shaped vertical waterproof heating tubes.

When heating a low-power water tank, we can choose a U-shaped heating pipe. If the water level in the tank is not fixed, water droplets often fall, and it is required to only be on the top of the water tank. We can also choose U-shaped vertical waterproof electric heating pipes, and the vertical upward part can be set with a cold zone. One thing to remind everyone is that although the heating tube terminal has undergone silicone pressure treatment, it cannot be completely immersed in water.

If the power is relatively high, we can choose a flange heating tube. According to different installation methods, we can choose between flat flange heating pipes and threaded flange heating pipes. The flat flange heating pipe needs to be installed with a female flange, and the threaded flange heating pipe needs to be tapped back according to the diameter of our thread, and can be directly tightened. In short, configure and install heating pipes according to the customer's needs, and choose as convenient as possible.

Www.superbheater.com