Standard operating requirements for dryers

Standard operating requirements for dryers: The use of dryers should comply with certain safety requirements. If the user lacks the necessary knowledge of the operation of the drying equipment, it is likely to cause damage to the equipment in the event of incorrect operation, or even more serious, personal injury, which is undesirable for everyone. Therefore, Hongtu will talk to you today about the specific requirements for the standardization of the dryer: 1. Feeding: evenly feeding, not too much or stopping for too long before feeding. 2. Fuel: The coal used for the dryer equipment, furnaces, and kilns should be above 600 kcal. Stoker: Maintain appropriate temperature, frequently add coal, burn thin coal, timely clean slag, and timely coal. 4. Check whether the dryer, conveyor, and connecting screws are loose, and whether the belt tightness is normal. 5. Regularly clean the materials falling from the joint between the conveyor and the dryer furnace during work. 6. Check whether the belt of the belt conveyor deviates and whether the joint connection is intact, and timely adjust and repair it. "At night, if the furnace fires are not completely cleared and extinguished, someone must be on duty to prevent them from burning up and damaging the equipment.". 8. The mechanic should add butter and oil to each component in a timely manner, regularly check whether each machine has abnormal sounds, and promptly handle any problems found. Regularly check whether each component is missing, and if any problems are found, promptly supplement them. Through the above content, everyone has a certain understanding of the standardized operation of dryers. The improvement of safety awareness cannot be separated from a correct understanding of professional operational knowledge. Users of dryers should not only improve their operational safety awareness, but also further master standardized operational knowledge through professional operational training.