Structural Analysis of QMTCL Trolley Type Heating Furnace

QMTCL series trolley type heating furnace is mainly used for quenching, annealing, aging of high chromium and high manganese steel castings, gray iron castings, ductile iron castings, rollers, steel balls, crusher hammers, wear-resistant lining plates and heat treatment of various mechanical parts.
Characteristics of QMTCL series trolley type heating furnace
The QMTCL series trolley type heating furnace has precise temperature control: During the heat treatment process, the temperature of the furnace can reach 1100 ℃ -1200 ℃. It can automatically control the temperature of the electric furnace according to the user's requirements for the heat treatment process, and can also use computers and various software to automatically control the gas generator and heat treatment furnace (user selectable).
The QMTCL series trolley heating furnace is used in conjunction with the atmospheric fixed bed gas generator: equipped with steam overpressure automatic protection device, explosion-proof device, gas safety release device, safe and reliable operation of the tube furnace, and can be continuously produced.
QMTCL series trolley type heating furnace energy-saving: low long-term operating cost; When the coal consumption per ton of workpieces is 150-200kg, and the loading capacity is around 30 tons, the coal consumption per ton of workpieces is below 150kg.
QMTCL series trolley heating furnace meets environmental standards: During use, the box furnace has no visible smoke (fog) emissions, no gas leakage, and the working environment for workers is dry and static, safe, and reliable.
The QMTCL series trolley type heating furnace has a small temperature difference inside the furnace: with a unique heating furnace design, the temperature difference inside the furnace is within ± 10 ℃ during insulation. The unique nozzle design ensures that there is very little oxidation and decarburization layer on the workpiece.
The QMTCL series trolley heating furnace has various structural forms: the box type electric furnace heating furnace can adopt a full fiber structure, a full refractory brick structure, and a half fiber and half brick structure.
Professional team: With professional design, furnace building, installation and debugging personnel to ensure the quality of equipment construction.
Precautions for QMTCL series trolley type heating furnace
1. Fixed or overturned trolley can be selected according to the actual needs of the user
2. Automatic temperature control operation is carried out in the range below 950 ℃. If the temperature exceeds 950 ℃, an air preheating device needs to be added, which is not listed in the table.
3. The working dimensions of the furnace refer to the top combustion furnace located 150mm below the centerline of the burner, the side combustion furnace of the tubular electric furnace refers to the effective loading height, and the length and width dimensions refer to the dimensions of the trolley.
4. The coal consumption index is influenced by the nature of raw coal and operating habits, with a permissible fluctuation of ± 30%

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!