The benefits of pipeline heaters for the aquaculture industry

To keep humans warm, there are even fewer chickens, ducks, geese, and other animals that need to be farmed, especially when the temperature difference between day and night is extremely high. At this time, animals are particularly weak and the risk of infectious diseases is high. Therefore, cold prevention measures are essential.
The commonly used measures for increasing temperature and keeping warm in winter in small-scale breeding farms include floor heating, water heating, hot air fans, infrared insulation lamps, and electric insulation boards.
Floor heating: It refers to the management of circulating water in the ground, heating the boiler water, and injecting hot water into the circulating water pipe through a circulating pump to increase the ground temperature. This method is very effective and does not occupy the ground area, and is commonly used in many breeding farms. This insulation level is not high, but pay attention to protecting against some respiratory diseases.
Water heating: Due to the upward heating effect of water radiators, the heating effect is average, and the investment is large, the floor area is large, and the usage is decreasing.
Hot air blower: Hot air blower, commonly known as livestock and poultry air conditioner, uses hot air to blow the heat from the boiler into the breeding farm, ensuring uniform temperature, cleanliness, and hygiene. It is also much cheaper than electric air conditioner, so many large breeding farms are using it.
Infrared insulation lamp: Currently, infrared insulation lamps are widely used. The method is to hang an infrared lamp on the area where the livestock and poultry are lying or in the insulation room to keep them warm and warm, and the hanging height of the lamp can be adjusted at any time according to the temperature required by the livestock and poultry. This method has simple equipment and good insulation effect.
Electric heating insulation board: The outer shell of the electric heating insulation board is made of engineering plastic with high mechanical strength, acid and alkali resistance, aging resistance, and non deformation. The board surface is equipped with ribs to prevent slipping.
With the high demand for temperature in winter aquaculture and strict national environmental inspections, pipeline heaters are becoming increasingly popular in the aquaculture industry.
Pipeline heaters were previously widely used in industrial applications, such as the treatment of chemical wastewater, the preparation of glass, the heating of factories, and the preparation of meltblown fabrics. However, nowadays, pipeline heaters are gradually being used in the aquaculture industry.
A gas pipeline heater is an electric heating device that is placed in a cylindrical insulated container and filled with heating pipes to heat gases and liquids. Gas pipeline heaters have the characteristics of fast heating speed, good insulation performance, and high heating temperature. So gas pipeline heaters are usually used to heat gases such as air and nitrogen, and can heat the gas to the desired temperature in a short period of time. So it is widely used.
Pipeline heaters are energy-saving, but it is necessary to pay attention to the reasonable design of gas pipeline heaters' air volume and temperature rise. The power of a gas pipeline heater is determined based on the calculation of air volume and temperature rise. On the premise that the air volume and temperature rise meet the requirements, it is not advisable to use excessive air volume and temperature rise for gas pipeline heaters, as large air volume and temperature rise directly lead to excessive power efficiency of gas pipeline heaters and increase energy consumption. It is unnecessary to ask for noise due to excessive air volume. To comprehensively consider and reasonably design gas pipeline heaters, determine appropriate parameters.