The coil turns of electric heating tube manufacturers are related to the induction range of current control

The coil turns of electric heating tube manufacturers are related to the induction range of current control

Determine the air electric heating tube manufacturer's understanding of air quality. The coil turns of the electric heating tube manufacturer are the medium of current. The input-output voltage ratio is equal to the coil turns ratio, while the energy remains constant. Therefore, the secondary coil generates a large current at low voltage. For induction heaters, the bearing is a short circuited single turn secondary coil that generates a large amount of heat under low AC voltage conditions through a large current.

The heater itself and yoke are kept at room temperature. Due to the induction of current by this heating method, the bearings will be magnetized. It is important to ensure that the bearings will demagnetize in the future so that they will not absorb metal magnetic debris during operation. The Fag induction heater has an automatic demagnetization function.

It uses eddy currents generated in a metal alternating magnetic field to heat itself. It is usually used for metal heat treatment. The principle is that when thicker metals are in an alternating magnetic field, they will generate current due to electromagnetic induction. When thicker metal generates current, the current forms a spiral flow path inside the metal. In this way, the heat generated by the current will be absorbed by the metal itself, leading to a rapid increase in metal temperature.

In a high-temperature environment, the machine should maintain uniform heat dissipation and heating, and control the number of resistance wires required. Fill with crystalline magnesium powder with good thermal conductivity and insulation performance. This structure is not only advanced, with high thermal efficiency, but also uniformly heated. When there is current passing through the high-temperature resistance wire, the heat generated will diffuse to the surface of the metal tube through crystalline magnesium powder, and then transfer to the heated part or air to achieve the purpose of heating.

Www.superbheater.com