The correct usage method of armored thermocouple adhesive

1. What is armored thermocouple adhesive
Armored thermocouple adhesive is a special adhesive used to connect thermocouple cables and terminals or sensors. It has high temperature resistance, electrical insulation, and good adhesive properties, making it suitable for galvanic connections in high-temperature environments.

2. Usage of Armored Thermocouple Adhesive
When using armored thermocouple adhesive, the following steps need to be followed:

Preparation work. Firstly, clean the thermocouple cables and terminals or sensors that need to be connected, ensuring that there is no oil or other residue on the surface.

Apply glue. Apply an appropriate amount of armored thermocouple adhesive to the cable interface or terminal to form a thin and uniform adhesive layer.

Connection. Connect the adhesive coated cable interface or terminal to the thermocouple cable or sensor. Apply appropriate pressure to ensure a secure connection.

Curing time. After the connection is completed, wait for the glue to cure. Depending on the type of adhesive, the curing time may vary. Please refer to the product description or relevant guidance for waiting.

3. Precautions
When using armored thermocouple adhesive, the following precautions should be taken:

Confirm that the adhesive can adapt to the ambient temperature and other special conditions.

Reasonably control the amount of glue used as needed. Too little glue can lead to weak adhesion, while too much glue may affect the stability of the connection.

Be sure to wait for sufficient curing time according to the product instructions to ensure complete curing of the adhesive.

When using armored thermocouple adhesive, pay attention to protective measures and avoid contact with skin and eyes. In case of accidental contact, rinse immediately with water and seek medical assistance.

Armored thermocouple adhesive is an important material for connecting thermocouple cables and terminals or sensors. Under the correct use of glue, it can ensure the firmness and stability of the connection. When using, pay attention to selecting a suitable environment, using an appropriate amount of glue, and following the instructions to wait for the glue to solidify, to ensure the good effect of the glue.