The daily maintenance of the temperature regulating electric heating plate is as follows:

The daily maintenance of the temperature regulating electric heating plate is as follows:

1. During storage and installation, do not come into contact with oil, water, or plastic particles to prevent electric leakage.

When using instruments for heating, it is necessary to avoid forceful tapping or collision with hard objects that may cause ceramic tile breakage, and the exposure of alloy resistance wires that may affect the operation life.

Electric heating plate is a device that uses electric heating alloy wire as the heating material, mica soft plate as the insulation material, and wrapped with a thin metal plate for heating. Explosion proof electric heating plates are widely used for sample drying, drying, and other temperature tests, and are used in biological, genetic, environmental, biochemical laboratories, and analysis rooms.

1. The instrument should be kept clean and hygienic.

2. Regularly check whether the fan operates normally and whether there are any abnormal sounds. If there are any, immediately shut down the machine for inspection.

3. Regularly check if the ventilation openings are blocked and clean the accumulated dust regularly.

4. Regularly check whether the temperature controller is accurate. If it is not accurate, please adjust the static compensation or sensor correction value of the temperature controller.

5. Regularly inspect the heating tube for damage and the circuit for aging.

6. In case of sudden power outage, turn off the power switch and heating switch to prevent automatic startup when there is an incoming call.

The surface temperature of the board should be able to meet the requirements of various different usage temperatures. For example, boiling and boiling require a temperature of 100 ℃, while frying requires a temperature of 140-180 ℃. If it is too low, it cannot meet the requirement of frying food until it turns brown. If it is too high, the cooking oil is prone to carbonization. Therefore, the temperature of the board should be adjusted within the range of 120-350 ℃.

The reason why explosion-proof electric heating plates can quickly heat up space is that their electrical energy input is effectively converted into over 65% far-infrared radiation energy and over 30% convective heat energy.

www.superbheater.com