The oil barrel heating strip is a type of silicone rubber heating plate

The oil barrel heating strip is a type of silicone rubber heating plate

Adopting the soft and flexible characteristics of silicone heating plate, metal buckles are riveted on both sides of the heating plate with reserved holes, and spring buckles are used to fasten on the barrel, pipeline, and tank body. Easy and fast installation. It can make the silicone rubber heating plate tightly adhere to the heated part using the tension of the spring, heating quickly and with high thermal efficiency. The oil barrel heating belt makes it easy to remove the liquid and solidified substances in the barrel through heating, such as adhesives, grease, asphalt, paint, paraffin, oil, and various resin raw materials in the barrel. By heating the barrel body, the viscosity decreases uniformly, reducing the power of the pump.

Therefore, this device is not affected by seasons and can be used year-round. The surface mounted sensor of the oil drum heating belt directly controls the temperature through temperature regulation. The heating belt device for the oil barrel inside the tank includes a tank body, a power supply, a heating source, and a heat conduction device. The tank body is covered with a floor, and the power supply is connected to the heating source through an electric wire. The heating source is connected to the heat conduction device, and the heat conduction device is set under the floor. The heating source can be a heating box, which has a heating pipe and thermal conductive agent inside. The heating box is equipped with a thermal conductive agent outlet and inlet outside, and the power supply is connected to the heating pipe; The outlet of the thermal conductive agent is connected to a pump, which is then connected to one end of the thermal conductive pipe, and the other end of the thermal conductive pipe is connected back to the inlet of the thermal conductive agent. The heating source and thermal conductivity device can be combined into an electric heating strip or electric heating film. The electric heating strip (or film) is placed under the floor, and the electric heating strip (or film) contains an electric heating wire. The power supply is connected to the electric heating wire.

The hose structure is wrapped with a layer of waterproof and insulated heating tape structure, and the outer layer of the tape structure is equipped with a sheath. The above waterproof insulation heating belt structure is formed by folding a soft belt along its longitudinal axis. When the soft cloth is unfolded, at least one strand of binding rope is threaded in the upper longitudinal middle, and the soft cloth is divided into an insulation area and a heating area. The heating area is longitudinally hidden with a galvanized pipe electric heating body. In environments with abnormally low temperatures, heating can be applied to the hose structure through a heating element, ensuring that the hose structure is always used within the allowable temperature range. Please make sure to maintain the power plug socket, and the power indicator light on the power plug is on. The anti freezing range of the electric heater is only effective for the inside of the water heater. Please perform additional anti freezing treatment on the external piping of the water heater. If the power plug is unplugged or there is a power outage, the electric heater will stop working and cannot achieve its automatic insulation and antifreeze function.

Www.superbheater.com