The operation and development of electromagnetic heaters are more stable and reliable

Adjustment and maintenance of electromagnetic wall mounted furnace
Method for adjusting and maintaining the electromagnetic wall mounted furnace:
1. Conduct system discharge according to regulations to prevent pipeline blockage, clean the water tank, and ensure clean water quality. When discharging sewage, it only needs to be treated.
In an abnormal water environment, close the discharge valve and flow out of clean water to the discharge valve.
2. The container can be cleaned of dust and dirt on the cover plate according to regulations, and the cover plate can be cleaned and connected to ensure high transparency of the cover plate. Detergent.
It should be done in the morning or dusk, when the sunlight is not strong and the temperature is low, to prevent the copper cover from being crushed by cold water.
3. Carefully check whether the cover plate is damaged, and if there is any damage, it should be replaced in real time.
4. When handling vacuum tube solar water heaters, it is necessary to regularly check the vacuum degree of the vacuum tube or whether the inner glass tube is broken, and carefully absorb barium and titanium in the empty tube.
The gas agent has turned black, which means that the vacuum level of the feed has decreased and the heat collection pipe needs to be replaced.
In addition to cleaning the vacuum tube, the vacuum tube solar water heater should also clean the reflector at the same time.
6. Check and inspect each pipeline, valve, float valve, solenoid valve, adjacent rubber pipe, etc. for signs of leakage. If so, it should be repaired in a timely manner.
If the heat absorbing coating of the collector is damaged or peeled off, it should be repaired in real time. All brackets, pipelines, etc. are painted once a year to prevent corrosion.